Big update PCMflash
The following changes have occurred in the Loader firmware PCMflash:
 
0. Changed the module names:

 

1. Added new Module 62 Ford/Getrag 6DCT450designed to work with the ECU 6DCT450 transmission installed in the Ford/Volvo/JLR. Supported read, write, clone the ECU.
  • TCM PowerShift (6DCT450) [RD/WR]
  • PowerShift 6DCT450 Boot (MICRO/EEPROM) [RD/WR]

 

2. Added new Module 63 Renault DC4designed to work with a DC4 transmission control UNIT, installed in the cars of Renault. Supported read, write, review, and correction of the COP.
  • EDC DC4 Gearbox (TC1766/1506KB) [RD/WR/CK]

 

3. Added new Module 64 Mitsubishi Fuso Canterdesigned to work with the ECU EDC7/EDC16/EDC17 diesel engines Mitsubishi Fuso Canter. Supported read, write, review, and correction of the COP. For some cars with ECU EDC7/EDC16 for writing may require a direct connection to the connector block.
  • Fuso Canter (EDC7C4-6/EDC16C31) [RD/WR/CK]
  • Fuso Canter Euro 5 CAN-bus (EDC17CP15) [RD/WR/CK]
  • Fuso Canter Euro 5 CAN-bus (EDC17CP52) [RD/WR/CK]

 

4. In Module 23 Subaru Denso added support for ECU control of diesel engine Euro 6 and diesel engines for the 2018 model year. Supported read, write, review, and correction of the COP.
  • 1.6 L, 2.0 L Denso DI 2018+ CAN-bus (1N83M/1.5 MB) [RD/WR/CK]
  • 2.0 L Denso Diesel Euro 6 CAN-bus (SH72543/2MB) [RD/WR/CK]

 

5. In Module 25 Renault/Nissan dCi added support for ECU SID309 mounted on cars Renault Master diesel 2.3 l engine Supported read, write, review, and correction of the COP.
 
 
6. In Module 29 Ford PWM added support for ECU PCM150. Supported read, write, review, and correction of the COP.
  • 3.0 L, 4.0 L, 4.6 L Duratec V6/V8 (PCM150) [RD/WR/CK]
 
7. In Module 34 Kia/Hyundai EDC15/EDC16 added support for ECU EDC15C7. Supported read, write, review, and correction of the COP.
  • 2.0 L, 2.5 L CRDI K-Line (EDC15C7) [RD/WR/CK]
 
8. In Module 35 Toyota/Lexus/Scion/Hino added support for ECU control hybrid setup. Supported entry, verification and correction of the COP.
  • 76F0038/39/40/50/70/85 HV Control CAN-bus [WR/CK]
 
9. In Module 44 Scania EMS S7/S8 added support for EMS S8 ECUS. Supported entry, verification and correction of the COP.
  • Scania EMS S8 250Kbps (MPC5566) [WR/CK]
  • Scania EMS S8 500Kbps (MPC5566) [WR/CK]
 
10. In Module 53 Infineon Tricore BSL added read passwords ECU Continental SID 208 (PSA) Bosch MED17.9.3 (Honda), read and write external EEPROM ECU Delphi CRD3.1 (Mercedes-Benz).
  • Delphi CRD3.1 EEPROM (32KB)
 
11. In Module 57 SIMOS 8/10/11/PCR2.1 added support for ECU SIMOS8.1/8.3. Supported reading, writing (no need unlock), verification and correction of the COP.
  • 2.8 L V6 FSI (SIMOS8.1) [RD/WR/CK]
  • 3.0 L V6 TFSI (SIMOS8.3) [VR/WR/CK]
 
12. In Module 58 VAG DSG/CVT added support for ECU VL300/V30/DQ500, work in BSL mode c VL300/V30, and work with OBD 0AM DQ200, DQ250 02E.
  • DQ200 (0AM) [WR/CK]
  • DQ250C (02E) [RD/WR/CK]
  • DQ250E/F (02E) [WR/CK]
  • VL300/V30 (01J/0AN) [WR/CK]
  • DQ500 (0BH/0BT) [RD/WR/CK]
  • VL300/V30 BSL (FLASH) [RD/WR/CK]
  • VL300/V30 BSL (EEPROM) [RD/WR/CK]
 
13. Also there has been a change of prices:


2014-2024 Equipment for car diagnostics and chip-tuning, tools and equipment for auto service - ECU Pro ©
Home Info Account WhatsApp
0
Cart