Modules MasterEditPro to buy, prices, reviews. Modules MasterEditPro in online store Pro ECU, characteristics, description, photos.

Includes extra features: preparing firmware ME17.9.11/12/13 to record its diagnostic method (WITHOUT opening the UNIT) disable diagnostic read firmware ME17.9.11/12/13 ( just 17.9.7, 17.9.71, 17.9.8, 17.9.21). Advanced features available for purchase under any of the modules of the family Bosch ME17.9.x. ..

$23.15

In stock

Bosch M7.8.0 module 1

Includes maps of the major calibration firmware M7.8.0. Free map updates for new software Bosch M7.8.0. Works with standard format firmware. Possible dual firmware Bosch M7.8.0: switching between the main calibrations (more than 20). Organization of switching modes according to the signals of DTV, ДК2 or the gas pedal. Types switch toggle switch/button. Fine tuning of the actuation switch (ADC fixing the shift points, o..

$46.30

In stock

Bosch M7.8.0 module 2

Includes all the module 1, the calibrated dual-mode firmware Bosch M7.8.0 and map-editing dual-mode firmware. Possible dual firmware Bosch M7.8.0: switching between the main calibrations (more than 20). Organization of switching modes according to the signals of DTV, ДК2 or the gas pedal. Types switch toggle switch/button. Fine tuning of the actuation switch (ADC fixing the shift points, on-hold pedal to switch, etc.). ..

$69.45

In stock

Bosch M7.8.0 модуль 1

Включает карты основных калибровок прошивок M7.8.0. Бесплатное обновление карт для новых софтов Bosch M7.8.0. Работает с стандартным форматом прошивок. Возможности двухрежимных прошивок Bosch M7.8.0: Переключение основных калибровок (более 20). Организация переключения режимов по сигналам ДТВ, ДК2 или педали газа. Типы переключение режимов тумблер/кнопка. Тонкая настройка срабатывания переключения (АЦП фиксации в момент..

$45.14

In stock

EMS3120 module 1

Designed for Renault cars/VAZ/Nissan Logan2, Sandero2, Lada Largus, Nissan Almera, Duster (engines D4F, K7M, K4M) MT and AT ECUS are equipped with Continental EMS3120. The module contains a set of basic calibrations, including: the Extended mask error, detailed identification information, the ability to view log entries 'reprove', calibration off ДК2 and control system thresholds, inclusion of L-regulation, start-up calibra..

$69.45

In stock

EMS3120 module 1

Includes calibration cards of VAZ firmware with ECU 74.9 manufactured by Itelma. Free map updates for this module. Recalculation of all CS in the firmware (BOOT area, main code and calibrations). Calibrations are available for the factory fixation of the CS and an extended software function for fixing the general KSPZ At and each area separately. Works with the standard firmware format. ..

$69.45

In stock

EMS3120 module 1 in the presence of two or more of any module MEPro

Designed for Renault cars/VAZ/Nissan Logan2, Sandero2, Lada Largus, Nissan Almera (motors D7F, K7M, K4M) MT and AT ECUS are equipped with Continental EMS3120. The module contains a set of basic calibrations, including: the Extended mask error, detailed identification information, the ability to view log entries 'reprove', calibration off ДК2 and control system thresholds, inclusion of L-regulation, start-up calibration, cal..

$45.14

In stock

EMS3125 module 1

Designed for vehicles Renault/VAZ Logan2, Sandero2, Kaptur, Lada XRAY (H4M engines, F4R) MT and AT ECUS are equipped with Continental EMS3125. The module contains a set of basic calibrations, including: the Extended mask error, detailed identification information, the ability to view log entries 'reprove', calibration off ДК2 and control system thresholds, inclusion of L-regulation, start-up calibration, calibration constra..

$69.45

In stock

January 7.2+ module 2 (only for users of the Module M73)

Available only when the module M73. Includes all the module 1, the calibrated dual-mode firmware Jan 7.2+ and map-editing dual-mode firmware. ..

$23.15

In stock

KIA/Hyundai Bosch M(G)7.9.8 module 1

Includes maps calibrations for all (known) firmware KIA/Hyundai Bosch M(G)7.9.8. Free map updates for new software Bosch M(G)7.9.8. Works with standard format firmware. Possible dual firmware KIA/Hyundai Bosch M(G)7.9.8: Switching basic calibrations (more than 50). Switching on the signals of DTV, ДК2 or the gas pedal. Types switch toggle switch/button. Fine tuning of the actuation switch (ADC fixing the shift points, l..

$69.45

In stock

KIA/Hyundai Bosch M(G)7.9.8 module 2

Includes all the module 1, the calibrated dual-mode firmware KIA/Hyundai Bosch M(G)7.9.8 (more than 260 modified to switch firmware) and maps editing dual-mode firmware. Possible dual firmware KIA/Hyundai Bosch M(G)7.9.8: Switching basic calibrations (more than 50). Switching on the signals of DTV, ДК2 or the gas pedal. Types switch toggle switch/button. Fine tuning of the actuation switch (ADC fixing the shift points, ..

$104.17

In stock

KIA/Hyundai Bosch ME(D)17.9.8 module 1

Includes maps of the calibration firmware the atmospheric GDI and Turbo GDI engines (free map updates). Works with standard (uncompressed) format. When you save the firmware recalculates the checksum of the calibration and code, it allows you to record them via BSL mode any existing boot loader. Or via OBD (diagnostic method), provided that the boot loader supports it. ..

$92.60

In stock

KIA/Hyundai Bosch ME(D)17.9.8 module 1 to module owners ME17.9.21

Includes maps of the calibration firmware the atmospheric GDI and Turbo GDI engines (free map updates). Works with standard (uncompressed) format. When you save the firmware recalculates the checksum of the calibration and code, it allows you to record them via BSL mode any existing boot loader. Or via OBD (diagnostic method), provided that the boot loader supports it. ..

$46.30

In stock

KIA/Hyundai Bosch ME17.9.11(12,13) module 1

Includes maps calibrations for all versions (free map updates for new software). Works with standard (uncompressed) format. Writing a modified firmware available only via BSL mode any existing boot loader. ..

$81.02

In stock

KIA/Hyundai Bosch ME17.9.21 module 1

Includes maps of the calibration firmware the atmospheric MPI engines up to 1.6, inclusive, (free map updates). Works with standard (uncompressed) format. When you save the firmware recalculates the checksum of the calibration and code, it allows you to record them via BSL mode any existing boot loader. Or via OBD (diagnostic method), provided that the boot loader supports it. ..

$92.60

In stock

KIA/Hyundai Bosch ME17.9.21 module 1 to module owners ME(D)17.9.8

Includes maps of the calibration firmware the atmospheric MPI engines up to 1.6, inclusive, (free map updates). Works with standard (uncompressed) format. When you save the firmware recalculates the checksum of the calibration and code, it allows you to record them via BSL mode any existing boot loader. Or via OBD (diagnostic method), provided that the boot loader supports it. ..

$46.30

In stock

M73 module 1

Includes maps calibrations for all firmware M73. Works with standard format firmware. ..

$23.15

In stock

M73 module 2

Includes all the module 1, the calibrated dual-mode under LPG firmware M73 (all the existing software) and maps editing dual-mode firmware. So, buyers free program DoubleM73 tied to the key. ..

$52.09

In stock

M74 6.38 (M74.5) Module 1

Includes maps calibrations for firmware blocks VAZ M74 6.38 (21127). Free map update module M74 6.38. Recalculation of the COP calibration of factory fixing, the COP extended its software-lock function of the COP. Works with standard format firmware 832kb (or 768kb). To edit an expanded set of calibrations (over 1500) and partial (to optimize the process in small settings), including the configuration, mask errors, fine-tun..

$57.87

In stock

M74 6.38 (M74.5) Module 2

Includes all the module 1, the calibrated dual-mode firmware 6.38 M74 and map editing dual-mode firmware. ..

$92.60

In stock

M74 6.38 module 1 for owners module M75

For owners module M75 Includes maps calibrations for firmware blocks VAZ M74 6.38 (21127). Free map update module M74 6.38. Recalculation of the COP calibration of factory fixing, the COP extended its software-lock function of the COP. Works with standard format firmware 832kb (or 768kb). To edit an expanded set of calibrations (over 1500) and partial (to optimize the process in small settings), including the configurat..

$40.51

In stock

M74 module 1

Includes maps calibrations for all firmware M74, М74CAN and М74к. Possible dual firmware M74: Complete switching of all calibrations in the firmware. Switching on the signals of DTV, ДК2 or the gas pedal. Types switch toggle switch/button. Fine-tune triggering of a switch (limit switch of the ADC, the ADC is fixing the shift points, on-hold pedal to switch, etc.). In any mode, you can optionally disable the fuel pump, i..

$46.30

In stock

M74 module 2

Includes all the module 1, the calibrated dual-mode firmware M74 (front wheel drive) and maps editing dual-mode firmware. Possible dual firmware M74: Complete switching of all calibrations in the firmware. Switching on the signals of DTV, ДК2 or the gas pedal. Types switch toggle switch/button. Fine-tune triggering of a switch (limit switch of the ADC, the ADC is fixing the shift points, on-hold pedal to switch, etc.). ..

$69.45

In stock

M75 module 1

Includes maps calibrations for firmware blocks VAZ M75 (ELCAR ECU M75). Free map update module M75. For transfer and cleaning of the area of study. Recalculation of the COP calibration of factory fixing, the COP extended its software-lock function of the COP. Works with standard format firmware 832kb (or 768kb). To edit an expanded set of calibrations (over 1500) and partial (to optimize the process in small settings), incl..

$57.87

In stock

M75 module 1 to module owners M74 6.38

For owners module M74 6.38 Includes maps calibrations for firmware blocks VAZ M75 (ELCAR ECU M75). Free map update module M75. For transfer and cleaning of the area of study. Recalculation of the COP calibration of factory fixing, the COP extended its software-lock function of the COP. Works with standard format firmware 832kb (or 768kb). To edit an expanded set of calibrations (over 1500) and partial (to optimize the p..

$40.51

In stock

M75 module 2

Includes all the module 1, the calibrated dual-mode firmware M75 and map editing dual-mode firmware. Possible firmware M75 dual mode: switching between the main calibrations (more than 50). The mode switching signal ДК2. In any mode, you can optionally disable the fuel pump, injector, and to set the delay of the transition to any mode. Firmware designed for the professional construction of systems with LPG and commercial mu..

$92.60

In stock

M86/M74M (ACCORDING TO VAZ) module 2

Includes calibration cards for the firmware of the M86 ECU with VAZ software and the M74M ECU. As well as basic, non-calibrated dual-mode M86 (VAZ) and M74M firmware, dual-mode firmware editing cards. The maps also contain additional calibrations of the "Extended Mix composition" for specialized software M86/M74M. ..

$81.02

In stock

Mikas-11 module 1 (only for users of the Module M73)

Available only when the module M73 Includes maps of the calibration firmware the GAS Mikas 11/11CR/11ET. Works with standard format firmware. ..

$23.15

In stock

Registrar VAZ Bosch ABS9

The module is intended for editing data from Ieprom blocks Bosch ABS9, VAZ cars (XRAY / VESTA). You can change the main mileage, mileage after ECU reset, TPMS log mileage, VIN, Hardware ID, wheel diameter, TPMS activation flag. The module monitors the integrity of the data upon opening and recalculates all the necessary CAs when saving. It allows you to set the desired mileage, and not reset it. ..

$23.15

In stock

Registrar VAZ M74.8/M74.9 (Itelma software)

The module is designed to edit the data of the registrar of the VAZ 74.8 and M74.9 blocks with NPO Itelma. The module monitors the integrity of the data when opening and recalculates all the necessary CS when saving. An EEPROM (4 kilobytes) is used for editing. ..

$23.15

In stock

The Registrar FOR * itelma UAZ M86I/Микас12

The module is intended for editing of data logger units UAZ M86I and Микас12 (GAS) with * Itelma. The ECM monitors data integrity when opening and recalculates all necessary COP when saving. For editing you can use as EEPROM separately (64 kilobytes) and the firmware entirely from the training data inside the ..

$23.15

In stock

The Registrar M74/М86 (FOR vases)

The module is intended for editing of data logger units M74 (storing training data in flash CPU) and М86, ON 'VAZ'. The ECM monitors data integrity when opening and recalculates all necessary COP when saving. For editing you can use as EEPROM separately (64 kilobytes) and the firmware entirely from the training data inside. ..

$23.15

In stock

The Registrar UAZ Bosch M(E)17.9.7/M(E)17.9.71

The module is intended for editing of data logger units UAZ Bosch M(E)17.9.7 and M(E)17.9.71. So the module allows to change the counter programmed the ECU. The ECM monitors data integrity when opening and recalculates all necessary COP when saving. For editing is used EEPROM (32 or 64 kilobytes, respectively the type of ECU). ..

$23.15

In stock

The Registrar VAZ Bosch ME17.9.7/ME17.9.71

The module is intended for editing of data logger units VAZ Bosch ME17.9.7 and ME17.9.71. The ECM monitors data integrity when opening and recalculates all necessary COP when saving. For editing is used EEPROM (32 or 64 kilobytes, respectively the type of ECU). ..

$23.15

In stock

The Registrar VAZ M74.5/M75/M86I (FOR * Itelma)

The module is intended for editing of data logger units M74.5 (6.38), M75 and vases M86I with * Itelma. The ECM monitors data integrity when opening and recalculates all necessary COP when saving. For editing you can use as EEPROM separately (64 kilobytes) and the firmware entirely from the training data inside. ..

$23.15

In stock

UAZ М86І (FOR * Itelma) module 1

Includes maps of the calibration firmware the UAZ with the ECU М86І AT * Itelma. Free map update module UAZ М86І. Recalculation of the COP calibration of factory fixing, the COP extended its software-lock function of the COP. Works with standard format firmware 1088kb. ..

$69.45

In stock

UAZ М86І (FOR * Itelma) module 2

Includes all the module 1, the base, not calibrated dual-mode firmware UAZ M86I and map editing dual-mode firmware. Includes maps of the calibration firmware the UAZ with the ECU М86І AT * Itelma. Free map update module UAZ М86І. Recalculation of the COP calibration of factory fixing, the COP extended its software-lock function of the COP. Works with standard format firmware 1088kb. Possible dual firmware VAZ and UA..

$104.17

In stock

VAZ Bosch M7.9.7+ module 1

Includes maps calibrations for all firmware VAZ Bosch M7.9.7+. Works with standard and 'compressed' format firmware. Possible dual firmware 797+: switching between the main calibrations (more than 30). Switching to DTV signals, the PSD or the gas pedal. Types switch toggle switch/button. Fine tuning of the actuation switch (ADC fixing the shift points, on-hold pedal to switch, etc.). In any mode, you can optionally disa..

$23.15

In stock

VAZ Bosch M7.9.7+ module 2

Includes all the module 1, the calibrated dual-mode firmware VAZ Bosch M7.9.7+cards and editing dual-mode firmware. Possible dual firmware 797+: switching between the main calibrations (more than 30). Switching to DTV signals, the PSD or the gas pedal. Types switch toggle switch/button. Fine tuning of the actuation switch (ADC fixing the shift points, on-hold pedal to switch, etc.). In any mode, you can optionally disab..

$69.45

In stock

VAZ M74.8 (Ithelma software) module 1

Includes calibration cards of VAZ firmware with ECU 74.9 manufactured by Itelma. Free map updates for this module. Recalculation of all CS in the firmware (BOOT area, main code and calibrations). Calibrations are available for the factory fixation of the CS and an extended software function for fixing the general KSPZ At and each area separately. Works with the standard firmware format. ..

$69.45

In stock

VAZ М86І (FOR * Itelma) module 1

Includes maps of the calibration firmware vases with ECU М86І AT * Itelma. This engines a 1.8 L 16v with VVT. Free map update module VAZ М86І. Recalculation of the COP calibration of factory fixing, the COP extended its software-lock function of the COP. Works with standard format firmware 1088kb. ..

$69.45

In stock

VAZ М86І (FOR * Itelma) module 2

Includes all the module 1, the base, not calibrated dual-mode firmware VAZ M86I and map editing dual-mode firmware. Includes maps of the calibration firmware vases with ECU М86І AT * Itelma. This engines a 1.8 L 16v with VVT. Free map update module VAZ М86І. Recalculation of the COP calibration of factory fixing, the COP extended its software-lock function of the COP. Works with standard format firmware 1088kb. Poss..

$104.17

In stock

VAZ/Renault Siemens EMS3132 module 1

Includes maps of the calibration firmware the Lada Largus and Renault Logan/Sandera (also the cards will be added calibrations from similar control systems, such as Kangoo, Symbol and others). Free map updates for new software EMS3132. Works with FullBIN 256 kb and the file of some calibrations (note that the calibration file is smaller than 32 kilobytes is not part of the axis of quantization, and some calibration). Module..

$57.87

In stock

VAZ/UAZ Bosch ME17.9.7(1) module 1

Includes maps calibrations for all versions (free map updates for new software). Works with regular (not compressed) format. This module INCLUDES the CONVERSION of a DIGITAL SIGNATURE! The edited firmware can be written as a diagnostic method (without disassembling the unit) or via BSL mode any existing bootloader (recommended to use MultiFlasher). ..

$75.24

In stock

VAZ/UAZ Bosch ME17.9.7(1) module 2

Includes all the module 1, basic, not calibrated 3 performance firmware VAZ/UAZ ME17.9.7(1) with possibility of setting the desired composition of the mixture in any mode and map editor 2nd and 3rd mode in this firmware. Works with regular (not compressed) format. The edited firmware can be written as a diagnostic method (without disassembling the unit) or via BSL mode any existing boot loader. Opportunities 3 secure fi..

$121.53

In stock

MasterEditPro Modules

add to cart

Information

Customer Service

Extras

My Account

Our contacts