ELM327 OBD2 wifi diagnostic adapter

Portable scan tool ELM 327 WIFI – suitable for advanced motorists and workers car. Allow read and delete errors of engine, take the operating parameters of the engine, and can turn your mobile phone (Apple or Android) to the onboard computer.

The advantages of ELM 327 WIFI :

• very small size, a little bigger than a matchbox
• supports all c WIFI system (Android, PC, WinCE, IPhone, IPad)
• very compact, has an elegant design, and easy to handle due to the absence of wires
• supports all vehicles with diagnostic connector OBD-II or EOBD
• you can also support trucks with the communication Protocol, j1939, and soon the ELM 327 WIFI will be able to read the data of the trucks in real time
• auto power off after 1 hour since last use. The device will enter the power saving mode and will consume only 3 µa.
• simple connection thanks to the built-in DHCP server. Just find a wifi network 'ELM327 WIFI' or 'VLink' and connect. The connection with the adapter to specify in the program is ip: 192.168.0.10, port: 35000

The list of protocols supported by the adapter ELM327 WIFI OBD2
OBD-2 (OBD II, OBD-2):

• ISO15765-4 (CAN) - New models of Ford, Jaguar, Mazda, Mercedes, Nissan, Toyota, Lexus, Renault, Peugeot, Chrysler, Opel, WV, Audi, Porsche, Volvo, Saab etc.
• ISO14230-4 (KWP2000) - Daewoo, Hyundai, KIA, Subaru STi, and some Mercedes models
• ISO9141-2 - Asia (Acura, Honda, Infinity, Lexus, Nissan,Toyota, etc.), Europe (Audi, BMW, Mercedes, MINI, Porsche, etc.), an early model Chrysler, Dodge, Eagle, Plymouth.
• J1850 VPW - Buick, Cadillac, Chevrolet, Chrysler, Dodge, GMC, Hummer, Isuzu, Oldsmobile, Pontiac, Saturn.
• J1850 PWM - Ford, Lincoln, Mercury, Jaguar, Mazda, Panoz, Saleen

Supported systems:

• The engine management system
• ABS, automatic transmission - depending on the manufacturer, but really support these systems via OBDII is very rare

The diagnostic program performs the following functions:

• Reading codes diagnosis of faults in General and specific manufacturer, showing the values (in the database more than 3000 codes).
• Reset error codes and turn off the light 'Check Engine' on the panel of devices
• Retrieving stored current values of the parameters of the control system at the time of the occurrence of the fault codes
• The reading and viewing test results, oxygen sensors
• Output of information on the diagnosed car ( VIN code and calibration data)
• Display current values of sensors, including:
• The engine speed
• Calculated load value
• Coolant temperature
• The status of the fuel system
• The speed of the car
• Short-term fuel balancing
• Long-term fuel balancing
• The pressure in the intake manifold
• Intake air temperature
• Air flow
• Throttle position
• Data oxygen sensor
• The fuel pressure
• Oil pressure

Recommended program for PC

• ScanMaster 2.1

Recommended apps for Android:

• Torque, paid 155 RUB (LITE is free)
• DashCommand, paid $49.99 (DEMO free)

Recommended programs for iPhone:

• Dashcommand, pay $49.99
• iOBD2only pay performance
• OBDCarDoctor, completely free and working
• DragFXfree
• FUZZYCar, pay 4.99$
• Rev Lite, free (pay REV 1299 RUB)

Package contents:

• WiFi OBD-II adapter the ELM327 chip c
• The CD

For Apple's iPhone, iPod touch and iPad OBDCarDoctor' -you need to download from the store Apple Store
Software for Android 'Torque' -you need to download from Google Play

Recommendations:

• Connect to WIFI network adapter called: VLink
• the ip address should be assigned automatically. 192.168.0.10 port circulation: 35000
• In the programs to specify the type of adapter: ELM327, OBDLink or ELM KIWI
• The most complete reading of the car will be on PC in the program ScanMaster. Less features on Apple devices.

Write a review

Your Name:


Your Review:

Rating: Bad           Good

Enter the code in the box below:

Write a review

Write review