The loader allows you to read and write firmware in flash memory controllers installed on Russian and foreign cars. The convenience of operation, reliability, availability of a large number of additional functions, constant updates and technical support make our loader the best choice for professional chip tuning. The loader also allows you to record calibrations without removing the ECU from the car, using the diagnostic recording method (recording via the K-Line diagnostic line), for all types of ECUs, where possible.
The basic package includes: a standard USB Host, a specialized adapter, a USB security key and software.
All new modules of the program use a common additional electronic key (included in the package price).
For modules that work with the ECU via CAN, a J2534 adapter is required, which is purchased separately. We recommend the DiaLink and Scanmatik-2 PRO adapters.
The USB Host adapter is used for data exchange, and is also used as a universal electronic key and a converter that provides work with K-L-line without using a COM port. The design of the USB Host adapter allows you to use it to update the firmware of the internal processor.
A specialized adapter in combination with a USB Host is used to generate control signals for reading and writing ECU firmware via the K-Line interface.
The CombiLoader software does not provide copy protection, while the program can only work with a specialized adapter. The adapter included in the program package provides data exchange, switching to programming mode and power supply automatically. Additional modules and plug-ins are available for a fee, and support and updates for purchased plug-ins are free.
Functionality of the CombiLoader
-
Scanning and output of the controller's passport data.
-
Reading and output of the controller configuration flags.
-
Reading the firmware from the file.
-
Identification of the type of downloaded firmware (single- or dual-mode).
-
Writing the firmware to the control unit.
-
Freeing the FLASH memory of the controller and the internal buffer of the program.
-
Scanning the firmware from the control unit to the internal buffer of the program.
-
Creation of dual-mode firmware for controllers of the January-5 and Mikas-7 family, including two calibration tables and allowing them to be switched during operation.
-
Adding functions of a route computer to the firmware with the output of parameters (up to 20 - freely selectable) to the VDO instrument cluster, viewing and deleting errors.
-
Reading and resetting errors (fault codes).
Software Requirements:
-
The software CombiLoader runs on a computer running the Windows 95/98/2000/XP/7/8/10/11 operating system and interacts with an adapter for data exchange of the electronic control unit with the USB port of the computer.
-
The package management program works only when a specialized adapter is connected. The adapter supplied with the program performs data exchange, switching to programming mode and power supply automatically.
-
The program is constantly being upgraded. For registered users, updates within the purchased configuration are free of charge. Additional modules and plug-ins are available for a fee, and support and updates for purchased plug-ins are free.
Modules included in the basic package:
-
BSL mode C16x is a wide range of imported and domestic cars equipped with ECUs based on microcontrollers of the C16x family.
-
BSL mode ST10F27x is a wide range of imported and domestic cars equipped with an ECU based on microcontrollers of the ST10F27x family.
-
BSL mode ST10F280 - Any type of ECU on processors of the ST10F280 family, for example, MagnetiMarelli 6LPB, installed on Peugeot cars.
-
BSL mode ST10F296 - Any type of ECU on processors of the ST10F296 family, for example, MagnetiMarelli 4HV, installed on Skoda Octavia/Fabia cars with a 1.4L (BUD) engine.
-
BSL mode ST10F168 - Any type of ECU on processors of the ST10F168 family, for example, MagnetiMarelli IAW 59F, installed on Fiat cars.
-
January-5.1 - VAZ cars.
-
January-7.2 - VAZ cars.
-
VS-5.1 - VAZ cars.
-
Bosch C509 - Hyundai/Kia Hyundai/Kia cars with ECU on C509 processor with external FLASH Am29F010.
-
Bosch MP7.0 - VAZ cars.
-
Bosch M7.9.7(+) - VAZ cars, Bosch M7.9.7 ECU.
-
Mikas-7.1 (7.2) - GAZ and UAZ cars.
-
Mikas-7.6 - ZAZ and Daewoo cars.
We perform fast worldwide shipping and PayPal payments
We provide a guarantee for products and technical support
Our system of discounts and regular promotions save your money
