Purpose:
CANswitch is a hardware CAN-line selector for ECU programming. It is useful when truck ECUs require access to different CAN pairs, including Bosch EDC17CV44/45, EQ EDC17CV45, Bosch MD1CC878/WISE13, Weichai WISE13H and Bosch MD1CE100/868.
Selectable OBD pins and indicators:
The selected CAN-H/CAN-L pair is shown by its indicator:
-
Red: CAN-H pin 6 / CAN-L pin 14.
-
Green: CAN-H pin 1 / CAN-L pin 9.
-
Blue: CAN-H pin 2 / CAN-L pin 10.
Controls and memory:
Press the control button to select a CAN pair. The selection is stored after two seconds and restored when power is reapplied.
Connection:
Connect the adapter between the ECU programmer OBD connector and the vehicle diagnostic socket. The adapter passes the power lines, K-line on pin 7 and L-line on pin 15 through from input to output. It is not tied to a particular software package.
Termination:
A built-in 120-ohm termination resistor is connected only to the selected CAN-H/CAN-L pair.
Power supply:
Powered from the vehicle OBD socket; supported onboard voltage is 12–24 V. Incorrect power connection is prohibited and may damage the CANswitch or connected diagnostic equipment.
Package contents:
CANswitch adapter.
Supplier-stated warranty:
One year.
Weight:
0.15 kg.