▲
Professional tools for chip-tuning
and car diagnostics
News
🔥
Shipping and payment
Discounts
Warranty & Offer
Contacts
Your shopping cart is empty!
0
+7 705 763 01 86
WhatsApp messages
info@ecupro.kz
Find it!
Login
or
create an account
| English|
Русский
|
Chip Tuning
Diagnostic Scanners
Software Modules
BitBox
BitEdit
ChipExplorer
ChipLoader
ChipTuningPRO 7
CombiLoader
ECULite
M&D Flasher
MasterEditPro
MMC Flasher
OpenBox
OpenDiagPro
PCMflash
ProBYTE
ScanDoc
Additional Equipment
For CombiLoader
For PCMflash
For MDFlasher
For BitBox
For MasterEditPro
For Openbox
For FLEX
Catalog
Input your e-mail:
Notify
Close
Home
»
Additional Equipment
» For BitBox
Cables and Adapters for BitBox
Display:
List
/
Grid
Show:
25
50
75
100
1000
Sort By:
Default
Name (A - Z)
Name (Z - A)
Price (Low > High)
Price (High > Low)
Rating (Highest)
Rating (Lowest)
Model (A - Z)
Model (Z - A)
CombiBox Switching Unit for PCMflash
CombiBox is designed for connecting the control unit to the PCMflash loader and the j2534 adapter "on the table" and switching power supply voltages and generating BOOT, CNF1 signals. When used with the Scanmatik 2 (PRO) adapter, the device allows you to generate gpt1 and GPT2 signals necessary for working with modules 53 and 71, as well as with advanced modules. Power supply: For CombiBox to w..
$109.53
In stock
Adapter BITS001 for J2534
A special adapter to connect the control units on the table. Performs automatic power management, and boot pins through the J2534 adapter.* Required to read in the BSL mode for control units Bosch M7.8/ME7.8.8 and Continental SIM2K-25x/26x * - tested and guaranteed works with Tactrix OpenPort 2.0 ..
$73.02
In stock
Adapter SM2/3 Boot/Bench for Scanmatik
Purpose: Universal adapter for Scanmatik SM2/SM2PRO/SM3 and PCMflash, with manual and automatic control of ECU power and BOOT. Indicators: Green: adapter power. Red: ECU POWER +12 V; power can also be enabled manually by the switch. Blue: BOOT enabled on CNF1, BOOT1 and BOOT2; BOOT can also be enabled manually by the switch. Wire identification: POWER +12 V: red; GND: black; CAN-H: white; CAN-L: green; K..
$80.33
In stock
BITS002 Adapter for BitBox
Purpose: BITS002 is a bench-connection adapter for ECUs. It provides automatic power and boot-pin control through a J2534 interface. Its female OBDII socket connects to an interface such as Scanmatik SM2, SM2PRO or SM3. Wire identification: Connect the leads according to the relevant programming-software documentation. Red — +12 V POWER Black — Ground Yellow — CAN-Hi Blue — CAN-Lo ..
$81.79
Expected arrival
Cable Bosch MSE6.0 for BitBox
Purpose:Cable for programming Bosch MSE6.0 ECUs.Software:Programming is performed with BitBox and the China Bosch Moto/Extreme module.Connection:Connects directly to the ECU.Cable length:0.7 m...
$58.42
Under the order. 10-15 days
Cable Continental SIM2K-250/251/258/259/260/261 for BitBox
Purpose:Cable for connection to Continental SIM2K-250/251/258/259 ECUs.Connection:The cable has a connector for quick ECU connection and an adapter for connection to the SM2 OBD cable. Operation does not require prior ECU opening or unlocking...
$131.44
Under the order. 10-15 days
Cable Delphi MT05 / MT05.2 for BitBox — K-Line + Recovery
Purpose:K-Line + recovery cable for programming Delphi MT05/MT05.2 ECUs.Software:Programming is performed with BitBox and the Delphi MT05 module.Connection:Connects directly to the ECU.Cable length:0.7 m...
$51.12
Under the order. 10-15 days
Cable Delphi MT05.3 for BitBox
Purpose:Cable for programming Delphi MT05.3 ECUs.Software:Programming is performed with BitBox and the Delphi MT05 module.Connection:Connects directly to the ECU.Cable length:1 m...
$51.12
Under the order. 10-15 days
Cable MD1CE100 for BitBox
Purpose:Cable for programming MD1CE100 ECUs on KAMAZ K5 vehicles with the R6 engine.Software:Programming is performed with BitBox and the Bosch MG1/MD1 BENCH [SM2 only] module.Connection:Connects directly to the ECU. The cable has a connector for quick ECU connection and an adapter for connection to the SM2 OBD cable.Firmware editing:Firmware can be edited in ECULite using module 23 KMZ MD1CE100...
$102.23
Under the order. 10-15 days
Cable MG1UA008/UP8 for BitBox
Purpose:Bosch MG1UA008/UP8 cable for direct connection to ECUs. Works with a J2534 interface.Applications listed by the manufacturer:Haval Jolion 1.5 MG1UA008/UP8JAC J7 1.5 MG1UA008/UP8..
$131.44
Under the order. 10-15 days
Cable MG1US008/UD8 for BitBox — Type 1
Purpose:Bosch MG1US008/UD8 Type 1 cable for direct connection to ECUs. Works with a J2534 interface.Applications listed by the manufacturer:Haval F7 1.5 MG1US008/UD8Haval Dargo 2.0 MG1US008/UD8Haval H9 2.0 MG1US008/UD8Haval H6 2.0 MG1US008/UD8Great Wall Tank 300 2.0 MG1US008/UD8Great Wall Poer 2.0 MG1US008/UD8Chery Tiggo 8 Pro Max 2.0 MG1US008/UD8Chery Exeed TXL 2.0 MG1US008/UD8Chery Exeed VX 2.0 MG1US008/UD8Changan CS35 NEW 1..
$131.44
Under the order. 10-15 days
Cable MG1US008/UD8/MG1US708 for BitBox — Type 2
Purpose:Bosch MG1US008/UD8/MG1US708 Type 2 cable for direct connection to ECUs. Works with a J2534 interface.Connector version:MG1US008 ECUs fitted to SAIC vehicles and MG1US708 ECUs use a connector whose keying differs from otherwise similar units fitted by other manufacturers...
$131.44
Under the order. 10-15 days
Cable SM2-MD1 / MG1 BMW for Scanmatik — PCMflash / BitBox
Purpose:Cable for programming BMW ECUs.Software:Works with PCMflash module 92 — Bosch MD1/MG1 Bootloader / Bosch ECU service mode.Connection:Connects directly to a Scanmatik SM2/SM2PRO/SM3 interface.Cable length:1 m.Supported applications:PCMflash module 92 supports BMW Bosch MD1CS001, MD1CP002/032 and MG1CS003/024/201. BitBox FID 282 Bosch MG1/MD1 BENCH [SM2/SM3 only]: MD1CS001, MD1CP002, MD1CP032, MG1CS003, MG1CS024 and MG1C..
$146.05
Under the order. 10-15 days
Cable SM2-MD1CP001 / MG1CP002 Mercedes-Benz for Scanmatik — PCMflash / BitBox
Purpose:Cable for programming MD1CP001 and MG1CP002 ECUs fitted to Mercedes-Benz vehicles.Software:Works with PCMflash module 92 — Bosch MD1/MG1 Bootloader / Bosch ECU service mode.Features:A switch selects the ECU type.Connection:Connects directly to a Scanmatik SM2/SM2PRO/SM3 interface.Cable length:1 m.BitBox support:Also works with FID 282 Bosch MG1/MD1 BENCH [SM2/SM3 only].Documentation:Current PCMflash module 92 documenta..
$102.23
Under the order. 10-15 days
Cable SM2-MD1CS006 / MD1CS016 for Scanmatik — PCMflash / BitBox
Purpose:Cable for programming MD1CS006/MD1CS016 ECUs fitted to Nissan/Renault/Dacia vehicles.Software:Works with PCMflash module 92 — Bosch MD1/MG1 Bootloader / Bosch ECU service mode.Connection:Connects directly to a Scanmatik SM2/SM2PRO/SM3 interface.Cable length:1 m.BitBox support:Also works with FID 282 Bosch MG1/MD1 BENCH [SM2/SM3 only].Documentation:Current PCMflash module 92 documentation..
$73.02
Under the order. 10-15 days
Cable SM2-MD1CS012 Hyundai/Kia for Scanmatik — PCMflash / BitBox
Purpose:Cable for programming MD1CS012 ECUs fitted to Hyundai/Kia vehicles.Software:Works with PCMflash module 92 — Bosch MD1/MG1 Bootloader / Bosch ECU service mode.Features:A switch selects the CAN-line assignment.Connection:Connects directly to a Scanmatik SM2/SM2PRO/SM3 interface.Cable length:1 m.BitBox support:Also works with FID 282 Bosch MG1/MD1 BENCH [SM2/SM3 only].Documentation:Current PCMflash module 92 documentation..
$131.44
Under the order. 10-15 days
Cable SM2-ME17 China for Scanmatik — PCMflash / BitBox
Purpose:SM2-ME17 China cable, article numbers 8025 and 9007, for programming Bosch ME17/ME17.8.8/ME17.8.8.1/ME17U6 China ECUs.Software:Works with PCMflash modules 51 — China, 71 — Bosch MEDC17 Bootloader.Features:The cable has a switch for selecting one of the ECU CAN buses.Connection:Connects directly to a Scanmatik SM2/SM2PRO/SM3 interface.BitBox support:China Bosch Petrol (FIDs 60, 82, 84, 127, 166) and Bosch MEDC17 Bench [..
$131.44
Under the order. 10-15 days
Cable SM2-ME17.8.5 for Scanmatik — PCMflash / BitBox
Purpose:Cable for programming ME17.8.5 ECUs.Software:Works with PCMflash module 71 — Bosch MEDC17 Bootloader.Connection:Connects directly to a Scanmatik SM2/SM2PRO/SM3 interface.BitBox support:Also works with BitBox FIDs 11, 31, 36 and 407.Documentation:Current PCMflash module 71 documentation..
$87.63
Under the order. 10-15 days
Cable SM2-MG1CA001 Nissan for Scanmatik — PCMflash / BitBox
Purpose:Cable for programming MG1CA001 ECUs fitted to Nissan vehicles.Software:Works with PCMflash module 92 — Bosch MD1/MG1 Bootloader / Bosch ECU service mode.Features:A switch selects the CAN-line assignment.Connection:Connects directly to a Scanmatik SM2/SM2PRO/SM3 interface.Cable length:1 m.BitBox support:Also works with FID 282 Bosch MG1/MD1 BENCH [SM2/SM3 only].Documentation:Current PCMflash module 92 documentation..
$80.33
Under the order. 10-15 days
Cable SM2-SIM2K-510 for Scanmatik — BitBox
Purpose:Cable for the BitBox module used to read and write Kefico SIM2K-510 ECUs fitted to diesel Kia and Hyundai vehicles. Kia/Hyundai Kefico SIM2K-510 TC297 8MB BENCH-CAN, FID 593: software identification and calibration-area reading/writing through a direct BENCH connection. Checksums are corrected during writing. ECU opening and unlocking procedures are not required.Connection:The cable connects to Kefico SIM2K-510 ECUs an..
$102.23
Under the order. 10-15 days
Cable SM2-SIM3K-543 for Scanmatik — BitBox
Purpose:Cable for the BitBox module used to read and write Vitesco/Continental SIM3K-540/541/542/543 ECUs fitted to petrol Kia and Hyundai vehicles. Kia/Hyundai Vitesco/Continental SIM3K-54X TC277 4MB BENCH-CAN, FID 550: software identification, protection/support status, protection disabling and calibration-area reading/writing on the bench. Checksums are corrected during writing. ECU opening is not required.Connection:Connec..
$102.23
Under the order. 10-15 days
Cable SM2-T/L-62-1 Toyota/Lexus for Scanmatik — PCMflash / BitBox
Purpose:Cables for Toyota and Lexus 62-pin connectors. They can be configured in one of four versions by agreement with the customer.Software:Works with PCMflash modules 74, 95.Connection:Connects directly to a Scanmatik SM2/SM2PRO/SM3 interface.BitBox support:Toyota Denso Gen3 CAN (FIDs 235, 236, 345) and Toyota Denso Gen4 BENCH-CAN (FIDs 473, 493, 508).Documentation:Current PCMflash module 74 documentationCurrent PCMflash mo..
$87.63
Under the order. 10-15 days
Cable UAZ AECS for BitBox
Purpose:Cable for programming UAZ AECS ECUs.Software:Programming is performed with BitBox and the VAZ/UAZ Petrol CAN module.Connection:Connects directly to the ECU.Cable length:0.7 m...
$80.33
Under the order. 10-15 days
CANswitch CAN Line Selector Adapter
Purpose: CANswitch is a hardware CAN-line selector for ECU programming. It is useful when truck ECUs require access to different CAN pairs, including Bosch EDC17CV44/45, EQ EDC17CV45, Bosch MD1CC878/WISE13, Weichai WISE13H and Bosch MD1CE100/868. Selectable OBD pins and indicators: The selected CAN-H/CAN-L pair is shown by its indicator: Red: CAN-H pin 6 / CAN-L pin 14. Green: CAN-H pin 1 / CAN-L p..
$73.02
Expected arrival
Showing 1 to 24 of 24 (1 Pages)
add to cart
Shopping cart
Continue shopping
Checkout
2014-2026 Equipment for car diagnostics and chip-tuning, tools and equipment for auto service - ECU Pro ©
Home
Info
Account
WhatsApp
0
Cart