Chip tuning: equipment and programs for engine tuning

J2534 adapter DiaLink + program SMSDiag 3

The SAE J2534 standard was introduced in 2002 to ensure the ability to reprogram the ECU via interfaces from different manufacturers. J2534 defines a standard interface to exchange data between the PC and the adapter. Because of this, the software manufacturer may, without delving into the specifics of the hardware implementation of the adapter is third party, use it to programme the control unit. Exists today adapter b..

$174.10

In stock

Editor firmware ChipTuningPro 7

The program works only with usb key, the same for all modules. Key without modules is not for sale. Modules activation in the presence of the usb key 1-24 hours in business days (usually 1-2 hours). Powerful, convenient and easy to use graphical editor calibrations in combination with a system of automatic checksums and digital signatures allows you to quickly and efficiently create firmware for any requi..

$34.82

In stock

Firmware loader CombiLoader

The loader allows you to read and write firmware in flash memory controllers installed on Russian and foreign cars. The convenience of operation, reliability, availability of a large number of additional functions, constant updates and technical support make our loader the best choice for professional chip tuning. The loader also allows you to record calibrations without removing the ECU from the car, using the diagnostic r..

$174.10

In stock

Firmware loader PCMflash

The program works only with usb key, the same for all modules. Key without modules is not for sale. Modules activation in the presence of the usb key 1-24 hours in business days (usually 1-2 hours). PCMflash - loader with the ability to record a stock and aftermarket firmware via the vehicle's diagnostic socket (CAN bus and K-Line). To work with the program requires a compatible adapter Scanmatik-2 PRO The sof..

$23.21

In stock

Software MDflasher

The program works only with usb key, the same for all modules. Key without modules is not for sale. Modules activation in the presence of the usb key 1-24 hours in business days (usually 1-2 hours). MDflasher software for odometer adjusting, to work with the immobilizer, the Airbag, and also to adjust the firmware of the ECU of the engine. The program works with adapter J2534. To date, tested and guaranteed to wor..

$34.82

In stock

Editor firmware BitEdit (Bit Edit)

The program works only with usb key, the same for all modules. Key without modules is not for sale. Modules activation in the presence of the usb key 1-24 hours in business days (usually 20 minutes). BitEdit is a modern editing of calibrations the car, allowing to change the basic parameters of the engine. The program is as follows: You open the firmware file, the file identificireba and produces a list of calibration..

$46.51

In stock

Editor firmware MasterEditPro

The program works only with usb key, the same for all modules. Key without modules is not for sale. Modules activation in the presence of the usb key 1-24 hours in business days (usually 1-2 hours). Available to all users free Module Jan 7.2+ module 1. Key features: Edit the calibration and the axes of quantization of any format (flags, options, text, two and three dimensional maps). Convenient interface chang..

$23.21

In stock

Firmware editor ECULite

The program works only with a usb key that is the same for all modules. A key without modules is not for sale. Activation of modules with a USB key is 1-24 hours on working days. Modern and convenient software for editing vehicle calibrations, designed to study the processes occurring in internal combustion engines. The 3D surface of ECULite allows you to view and analyze the firmwa..

$34.82

In stock

Firmware loader BitBox

The program works only with usb key, the same for all modules. Key without modules is not for sale. Modules activation in the presence of the usb key 1-24 hours in business days (usually 1-2 hours). BitBox is an evolving software package that allows to identify, read and write the internal flash memory of control units for various purposes. Working with units is performed via CAN or K-line interfaces using the adapter..

$46.51

In stock

Firmware loader ChipLoader 2

Modules activation in the presence of the usb key 1-24 hours in business days (usually 1-2 hours). The basic version of the program ChipLoader with support for the following types of ECUS: January-5.x, January-7.2, VS-5.1, Bosch M7.9.7, M7.9.7+, Mikas-7.1, Mikas-7.6, Mikas-10.3, Mikas-10.3+ (Mikas-11), Mikas-11 (GAZ), VS-8, January-7.2+, M 7.9.7 Kefico, Bosch MP-7.0, Bosch ME 7.9.9 Bosch M 7.9.8, Bosch ME..

$89.58

In stock

Firmware loader MMC Flasher

The program works only with usb key, the same for all modules. Key without modules is not for sale. Modules activation in the presence of the usb key 1-24 hours in business days. MMC Flasher universal Downloader intended for chip tuning Hyundai, Kia, Mitsubishi, Mazda, Nissan, Honda, Subaru. Supported read and write FLASH of a large number of ECU types/processor (see description of modules). MMCFlasher works w..

$26.70

In stock

Firmware loader OpenBox 3.3

Specified value of the usb protection key of the program. The program works only with usb key, the same for all modules. Key without modules is not for sale. Modules activation in the presence of the usb key 1-24 hours in business days (usually 1-2 hours). Openbox 3.3 - the program loader, prednaznachennuyu for ECU reprogramming: M797 (including ECUS fitted on vehicles of Chinese production), ME7.9.7, M(G)7.9.8 (using..

In stock

In stock

Multibrand scanner Scanmatik 2 PRO

Professional multibrand scan tool is designed to diagnose electronic control systems for modern vehicles. Working with a personal computer, tablet or smartphone, software for Windows and Android included. When you install the driver (included) works with third-party software, are made under the standards SAE J2534 and RP1210. To connect to the adapter can be used as USB or Bluetooth interfaces (built-in adapter ..

$445.69

Expected arrival

USB - OBD2 K-Line adapter ECU Pro

The adapter is designed to connect the personal computer and the vehicle's control systems, compatible with ISO-9141(K, L –line) or ISO14230 (KWP2000, in electrical terms similar to the ISO-9141). Works with passenger vehicles in the network 12V. The diagnostic complex based on a regular PC using the K-line adapter enables users to read DTCs, read data streams, the active test Executive components, adjustment values (ad..

$14.97

Delivery suspended

Programmer Xprog-M v5.55 + adapters

Updated version of programmer XPROG-M v5.55 is intended for programming of new microcontroller and memory chip manufacturers, Motorola, Infineon, Micronas, Texas, Atmel, ST, National(CR16), M35080 and immobilizer EWS-3, CAS4 5M48H including software is protected from reading. Authorization the Xprog-M version 5.55: AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM) AUTH-0002 Motorol..

$101.38

Delivery suspended

The TL866 programmer +adapters 19 PCs

The program in Russian and English languages. Universal programmer a large number of microcontrollers from Microchip, Atmel, Cypress, ST, etc., and also chip FLASH/EEPROM (currently more than 13000 chips). Connect to PC and power to the programmer through the USB port of the computer (5v). The list of supported chips Some of the features TL866a: Support AVR (Atmega, Attiny, AT90xxx) with the ability to ..

$126.44

Out of production

Chip tuning

add to cart

Information

Customer Service

Extras

My Account

Our contacts