ChipTuningPro7 Modules

Basic kit: GM ISFI-2S VAZ, the first serial electronic control system on domestic cars. January 4 VAZ, second serial electronic system of injection control, the domestic counterpart of ISFI-2S. Used since 1995 January-5.1.x VAZ, a domestic analogue system Bosch M1.5.4. Used since 1999. Jan-7.2 Cars VAZ. Used since 2003. January-7.2+ ..

In stock

* Base set of modules

The module allows for professional chip tuning of cars "Niva Legend 21214" and "Niva Travel 2123" of the 2022 model year with an electronic gas pedal (EGAS) equipped with the latest M74.9 ECU. More than 900 calibrations of the M74.9 control system are available for editing, allowing virtually unlimited possibilities for chip tuning: starting modes, UOZ, fuel supply with dynamic corrections and fuel film, torque model, EGAS ..

In stock

74.9 Niva

This module allows you to perform chip tuning of bi-fuel cars equipped with the Abit A12.2 ECU. The ECU is programmed using the CombiLoader loader. When saving the firmware, the checksums are automatically recalculated. Research with the help of reverse engineering of the control program allowed us to create an unparalleled tool for full-fledged chip tuning of bi-fuel cars equipped with an ABIT A12.2 ECU...

In stock

Abit A12.2

This module allows chip tuning of diesel trucks and commercial vehicles, as well as construction equipment equipped with the Abit M240 ECU. Programming of the ECU is carried out using the CombiLoader loader. Research with the help of reverse engineering of the control program allowed us to create an unparalleled tool for full-fledged chip tuning of trucks and commercial vehicles equipped with an ABIT M240..

In stock

Abit M240

ABIT M240S1 (КАМАЗ K5 54901).

In stock

The modules allow chip tuning of diesel trucks and commercial vehicles, as well as construction equipment equipped with Abit M240 and M240S1 (CAN) ECUs. Programming of the ECU is carried out using the CombiLoader loader. Research with the help of reverse engineering of the control program allowed us to create an unparalleled tool for full-fledged chip tuning of trucks and commercial vehicles equipped with..

ACDelco E37 (author KHN09)

In stock

The module allows chip tuning of Opel, Chevrolet, Cadillac cars equipped with an ACDelco E37 ECU. Examples of cars equipped with this type of ECU: Chevrolet Captiva (C140) 2011+, Opel Antara 2011+. Pay attention: A third-party developer module! Technical support from the author of the module (KHN09). Supported software versions: 12634915 12647468 12653292 12657728 ..

ACDelco E39/E39A (by KHN09)

In stock

The module allows for chip tuning of Opel, Chevrolet, Cadillac cars equipped with ACDelco E39 and E39A ECUs. Examples of cars equipped with this ECU type: Opel Insignia 2.0L A20NHH / A20NHT (LHU), Opel Antara 2011+ 3.0L (LF1), Opel Antara 2012+ 3.0L (LF1, LFW), Opel Astra-J A16XHT / 1.6L SIDI , Opel Astra-J OPC A20NHH, Chevrolet Captiva (C140) 2011+ 3.0L (LF1, LFW), Cadillac SRX 2010+ 3.0L (LF1). Note: ..

ACDelco E78 (author KHN09)

In stock

The module allows to make the chip tuning Opel and Chevrolet vehicles that equipped with ECU ACDelco E78. Examples of vehicles equipped with this type of ECU: Opel Astra J A14NET, A14NET Opel Opel Corsa C, Opel Mocca A14NET, A14NET Chevrolet Cruze, Chevrolet Tracker A18XER, Chevrolet Malibu A24XE. Please note: Third-party module developer! Technical support from the author of the module (KHN09). ..

ACDelco E80 (author KHN09)

In stock

The module allows you to perform chip tuning of Chevrolet cars equipped with an ACDelco E80 ECU. Pay attention: A third-party developer's module! Technical support from the author of the module (KHN09). Working with firmware that does not contain the control program code has special features: the type of ECU and the calibration card must be selected manually, and when saving the firmware, it is ..

The module allows to make the chip tuning Opel and Chevrolet vehicles that equipped with ECU ACDelco E83. Examples of vehicles equipped with this type of ECU: Opel Astra J A16XER, A18XER Opel Astra J, Opel Astra J A16LET, Opel Corsa D A12XER, A14XER Opel Corsa D, Opel Insignia A16XER, A18XER Opel Insignia, Opel A14NET Meriva B, Chevrolet Cobalt 1.5. ..

In stock

ACDelco E83

ACDelco E92 (author KHN09)

In stock

The module allows for chip tuning of GM cars (Chevrolet, Cadillac, etc.) equipped with an ACDelco E92 ECU, for example, Cadillac ATS 3.6L, Cadillac Escalade 6.2L, etc. Pay attention: A third-party developer module! Technical support from the author of the module (KHN09). Working with firmware that does not contain the control program code has the following features: the ECU type and calibration ..

For chip tuning Hyundai and Kia with diesel engine (CRDI). ..

In stock

Bosch EDC15C2

Bosch EDC17C08 Hyundai/Kia (author Vladimir Kulikov)

In stock

The module is designed for chip tuning Hyundai(I30, I40, IX35, Santa Fe) and Kia(CEE'd, Optima, Soul, Sportage, Venga) with diesel engines 1.6 CRDi, 2.0 CRDi. Please note: Third-party module developer! Technical support from the author of the module (V. Kulikova). Firmware families Bosch МEDC17 are stored by default in the format of SMS-Soft Container File. To download these firmware you need to..

Bosch EDC17C46 VAG (author KHN09)

In stock

The module is designed for chip-tuning of cars of the VAG group (Audi A3/A4/A5/A6/Q3/Q5/TT, Skoda Superb, VW Golf, VW Passat, VW Tiguan, etc.) with a diesel engine capacity of 2.0 L, EDC17C46 Bosch ECU. Please note: Third-party module developer! Technical support from the author of the module (KHN09). Firmware families Bosch МEDC17 are stored by default in the format of SMS-Soft Container File. ..

Bosch EDC17C53 Hyundai/Kia (author Vladimir Kulikov)

In stock

The module is designed for chip-tuning, car Hyundai I40, Hyundai IX35, KIA Soul diesel engines 1.6 CRDi and 1.7 CRDi. Please note: Third-party module developer! Technical support from the author of the module (V. Kulikova). Firmware families Bosch МEDC17 are stored by default in the format of SMS-Soft Container File. To download these firmware you need to use loader only CombiLoader. Savin..

Bosch EDC17C57 Hyundai/Kia (author Vladimir Kulikov)

In stock

The module is designed for chip tuning Hyundai Santa Fe, Hyundai Tucson, KIA Carnival, KIA Sorento Prime, KIA Sportage diesel engines 2.0 CRDi and 2.2 CRDi. Please note: Third-party module developer! Technical support from the author of the module (V. Kulikova). Firmware families Bosch МEDC17 are stored by default in the format of SMS-Soft Container File. To download these firmware you need to u..

Bosch EDC17C64 GAZ (by Vladimir Kulikov)

In stock

The Bosch EDC17C64 GAZ module is designed for chip tuning of GAZ group cars with VAG 2.0TDi diesel engines. Pay attention: Third-party developer modules! Technical support from the author of the module (V. Kulikova). The firmware of the Bosch EDC17 family controllers is saved in the SMS-Soft Container File format by default. To download such firmware, you need to use only the CombiLoader loader...

Bosch EDC17C74 VAG (by Vladimir Kulikov)

In stock

Bosch EDC17C74 module is designed for chip tuning of Audi A3 / Q2, VW Golf / Passat / Tiguan, Skoda Superb / Kodiaq and others with 2.0L TDI diesel engines. Note: Third party module! Technical support from the author of the module (V. Kulikov). By default, the firmware of Bosch MEDC17 family controllers is saved in the SMS-Soft Container File format. To download such firmware, only the CombiLoad..

Bosch EDC17C76 BMW (author Maxim Glazyrin)

In stock

The Bosch EDC17C76 (DDE742) module is designed for chip tuning of BMW cars with N 57 x diesel engines. Installed on: X5 Series F15 X6 Series F16 Pay attention: A third-party developer module! Technical support from the author of the module (M. Glazyrin). Supported software versions (any calibrations based on these software versions are supported): O_7UCA2 O_7UE..

Bosch EDC17CP09 BMW (author Maxim Glazyrin)

In stock

The Bosch EDC17CP09 module (P_573 DDE73), (P_574 DDE73a), (P_613 DDE73) is designed for chip tuning of BMW cars with N57xx diesel engines. Installed on: 3rd series E90, E91, E92 and E93 5th Series F07 7th series F01 and F02 X5 E70 Series X6 Series E71 Pay attention: About 800 calibrations are available for modification. The module calculates checksums while saving the fir..

$174.10

In stock

Bosch EDC17CP14 Hyundai/Kia (author Vladimir Kulikov)

The module is designed for chip tuning Hyundai(IX35, IX55, Santa Fe, Tucson) and Kia(Carnival, Mohave, Sorento, Sportage) with diesel engines 2.0 CRDi (D4HA, 184HP), 2.2 CRDi (D4HB, 197HP) and 3.0 V6 CRDi (D6EB, 247HP). Please note: Third-party module developer! Technical support from the author of the module (V. Kulikova). Firmware families Bosch МEDC17 are stored by default in the format of SM..

Bosch EDC17CP14 VAG (author KHN09)

In stock

The module is designed for chip-tuning VAG group (VW Tiguan, Touareg) with a diesel engine capacity of 3.0 L, Bosch ECU EDC17CP14. Please note: Third-party module developer! Technical support from the author of the module (KHN09). Firmware families Bosch МEDC17 are stored by default in the format of SMS-Soft Container File. To download these firmware you need to use loader only CombiLoader. ..

Bosch EDC17CP20 VAG (by Vladimir Kulikov)

In stock

The module is designed for chip tuning of Audi A4, A5, VW Amarok, Crafter, Passat, Transporter cars with 2.0L TDI and 2.5L TDI diesel engines. Allows for professional chip tuning of Bosch EDC17CP20 control systems. The possibility of correctly disabling the ecology of EGR, DPF, SCR (AdBlue). Pay attention: A third-party developer module! Technical support from the author of the module (V. Kulikova..

$174.10

In stock

Bosch EDC17CP44 VAG (author KHN09)

The module is designed for chip-tuning VAG group diesel engine 3.0 L ECU Bosch EDC17CP44. Please note: Third-party module developer! Technical support from the author of the module (KHN09). Firmware families Bosch МEDC17 are stored by default in the format of SMS-Soft Container File. To download these firmware you need to use loader only CombiLoader. Saving in the usual BIN format is also ..

Bosch EDC17CP45/CP49 BMW (author Maxim Glazyrin)

In stock

The Bosch EDC17CP45/CP 49 module (DE 731 P_730), (DDE731a P_731), (DDE731a P_731), (DDE751a P_1319) is designed for chip tuning of BMW cars with N47xx, N57xx, and B47xx diesel engines. Installed on: 1st series F20 and F21 2nd series F22, and F23 3rd series F30, F31, and F34 4th series F32, F33 and F36 5th series F07, F10 and F11 6th series F06, F12, F13 and F14 7th serie..

Bosch EDC17CP54 VAG (author KHN09)

In stock

The module is designed for chip-tuning VAG group (VW Amarok, VW Crafter, VW LT) with a diesel engine capacity of 2.0 L, ECU Bosch EDC17C54. Please note: Third-party module developer! Technical support from the author of the module (KHN09). Firmware families Bosch МEDC17 are stored by default in the format of SMS-Soft Container File. To download these firmware you need to use loader only CombiLoa..

The Bosch EDC7UC31 GAZ module is designed for chip tuning of GAZ and MAZ cars with YAMZ-5344.20, YAMZ-53416, YAMZ-53441.20, YAMZ-53442, YAMZ-536, YAMZ-53601, YAMZ-53602, YAMZ-53603, YAMZ-53613, YAMZ-53622, YAMZ-53623, YAMZ-53624, MMZ-245 diesel engines.7. Supported firmware (software versions P765.110, P986.200, P986.211), EDC7UC31 GAZ module: P_986.2.0.0_YMZ-53416_S3.5_20.05.2015 P_986.2.0.0_YM..

In stock

Bosch EDC7UC31 GAZ/MAZ

The Bosch EDC7UC31 KAMAZ module is designed for chip tuning of KAMAZ vehicles with diesel engines of the KAMAZ-740 family. Supported firmware (software versions P702.141, P986.310), EDC7UC31 KAMAZ module: 702V141_740.60-360-290812_5460-4010142-01 702V141_740.60-360-290812_6460-4010122-01 702V141_740.602-360-170214_5350-4010121-01 702V141_740.602-360-170214_6460-4010122-01 702V1..

In stock

Bosch EDC7UC31 KAMAZ

Bosch EDC7UC31 MAZ / KRAZ / URAL

In stock

The Bosch EDC7UC31 MAZ / KRAZ / URAL module is designed for chip tuning of MAZ, KrAZ, MZKT, Ural cars and generator sets with diesel engines. Supported firmware (software versions P766.120), module EDC7UC31 MAZ / KRAZ / URAL: P766_120_MAZ_YAMZ-650_C_14_w_o_Cr_Ct P 766_120_766 V 120_MAH_YAMZ650.10_5440A9_3097D1C000_S11 P766_120_766V120_MAZ_YAMZ650.10_5440A9_3097D3C000_S06 ..

For chip-tuning of automobiles in China, equipped with ECU Bosch M7.8. ..

In stock

Bosch M7.8 China

For chip-tuning of automobiles in China, equipped with ECU Bosch M7.9.7 and M7.9.7+. ..

In stock

Bosch M7.9.7 China

For chip tuning Hyundai vehicles equipped with KEFICO ECU or Bosch 7.9.7. ..

In stock

Bosch M7.9.7 Hyundai

For chip-tuning KIA vehicles equipped with KEFICO ECU or Bosch 7.9.7. ..

In stock

Bosch M7.9.7 Kia

This module allows to make the chip tuning Hyundai and KIA vehicles that equipped with ECU Bosch M(G)7.9.8 or KEFICO. Supported versions: PM98A440K PM98A442G PM98A533O PM98A742J PM98A833F PM98A833H PM98A833J PM98A833K PM98A833O PM98A840I PM98A840K PM98A842F PM98A842G PM98A842M PM98A842N PM98A842O PM98AA33F ..

In stock

Bosch M7.9.8 Hyundai/Kia

Bosch MD1CP002 (DE 832) BMW (author Maxim Glazyrin)

In stock

The Bosch MD1CP002 (DE 832) BMW module is designed for chip tuning of BMW cars with B57D30xx and B47D20xx diesel engines. Installed on: 3rd G20 Series 5th series G30 and G31 6th Series G32 7th series G11 and G12 8th series G14, G15 and G16 X3 Series G01 X4 Series G02 X5 Series G05 X6 Series G06 X7 Series G07 Pay attention: A th..

Bosch MD1CP002 (DE 832) BMW (author Maxim Glazyrin)

In stock

The Bosch EDC17C50 (DE 701) BMW module is designed for chip tuning of BMW and MINI cars with N47x, B47xx and B37xx diesel engines. Installed on: 1st series F20 and F21 2nd series F22, F23, F45 and F46 3rd series E90, E91, F30, F31, and F34 4th series F32, F33 and F36 5th series F07, F10 and F11 X1 series E84 and F48 X2 Series F39 X3 Series F25 X4 Series ..

Bosch MD1CP032 BMW (author Maxim Glazyrin)

In stock

The Bosch MD1CP032 (DE 853) BMW module is designed for chip tuning of BMW cars with M47 and B57xx diesel engines. Installed on: X5 Series G05 X6 Series G06 X7 Series G07 Pay attention: A third-party developer module! Technical support from the author of the module (M. Glazyrin). Supported software versions (any calibrations based on these software versio..

Bosch MD1CS001 BMW (author Maxim Glazyrin)

In stock

The Bosch MD1CS001 (DDE802L, DDE803S) BMW module is designed for chip tuning of BMW cars with B47D20xx diesel engines. Installed on: 3rd G20 Series 5th series G30 and G31 X3 Series G01 X4 Series G02 Pay attention: A third-party developer module! Technical support from the author of the module (M. Glazyrin). Supported software versions (any calibrations based on t..

Bosch ME17.5.26 VAG (author KHN09)

In stock

The module is designed for chip-tuning VAG cars equipped with Bosch ME17.5.26, for example, Skoda Octavia 1.6 MPI, Skoda Rapid 1.6 MPI Skoda Yeti 1.6, 1.6 MPI VW Jetta, VW Polo 1.6. Please note: Third-party module developer! Technical support from the author of the module (KHN09). Firmware families Bosch МЕ17 are stored by default in the format of SMS-Soft Container File. To download these firmw..

Bosch ME17.8.5 BRP (author Vladimir Kulikov)

In stock

The module is designed for chip tuning of BRP leisure equipment: ATV/UTV Can-Am 4-stroke engines of 600/800/900/1000/1300 cc (atmospheric and turbocharged) Commander Maverik Maverick X3 Maverick X DS Spider Sea-Doo jet skis with 4-stroke engines of 900/1500/1630 cc (atmospheric and with a mechanical supercharger) GTI GTX RTX RXT-X Pay atten..

Bosch ME17.8.8 (the author KHN09)

In stock

The module is designed for chip-tuning of automobiles in China, equipped with Bosch ME17.8.8, for example, Chery Tiggo 2.0 L, Chery Bonus (A19), Lifan X60, Lifan Solano II, etc. Please note: Third-party module developer! Technical support from the author of the module (KHN09). Firmware families Bosch МЕ17 are stored by default in the format of SMS-Soft Container File. To download these firmware ..

Bosch ME17.9.11/12/13 Hyundai/Kia

In stock

For chip tuning Hyundai and Kia with the control units Bosch ME17.9.11/12/13 ..

Bosch ME17.9.11/12/13 Hyundai/Kia dual-mode AT

In stock

The module is designed to create dual-mode firmware with a fully customized set of calibrations for the second mode. There is a possibility of fuel pump disconnection in any of the modes (a small portion of the firmware may not support this feature). You can also set the delay of switching modes in a wide range. Note: to use these modules requires a license to edit the firmware of the appropriate type! Fe..

Bosch ME17.9.2 Hyundai/Kia (author KHN09)

In stock

Please note: Third-party module developer! Technical support from the author of the module (KHN09). Firmware families Bosch МЕ17 are stored by default in the format of SMS-Soft Container File. To download these firmware you need to use loader only CombiLoader. Saving in the usual BIN format is also possible. Write the firmware with a modified calibration diagnostic method is possible using module B..

Bosch ME17.9.21 Hyundai/Kia (author KHN09)

In stock

Please note: Third-party module developer! Technical support from the author of the module (KHN09). Firmware families Bosch МЕ17 are stored by default in the format of SMS-Soft Container File. To download these firmware you need to use loader only CombiLoader. Saving in the usual BIN format is also possible. Write the firmware with a modified calibration diagnostic method is possible using module B..

Bosch ME17.9.21 Hyundai/Kia dual-mode AT

In stock

The module is designed to create dual-mode firmware with a fully customized set of calibrations for the second mode. There is a possibility of fuel pump disconnection in any of the modes (a small portion of the firmware may not support this feature). You can also set the delay of switching modes in a wide range. Note: to use these modules requires a license to edit the firmware of the appropriate type! Fe..

The module is designed for chip-tuning of cars Suzuli SX4 and Vitara (engine capacity 1.6 L), equipped with Bosch ME17.9.61. Please note: Firmware families Bosch МЕ17 are stored by default in the format of SMS-Soft Container File. To download these firmware you need to use loader only CombiLoader. Saving in the usual BIN format is also possible. Write the firmware with a modified calibrati..

In stock

Bosch ME17.9.61 Suzuki

Bosch ME17.9.7 and Bosch ME17.9.71 Oise Registrar

In stock

The module allows you to view and edit data recorder, which are stored in the EEPROM. It is possible to work as with binary EEPROM images (files .eep), and with container SMS-Soft Container File (files .bcf). When you save the EEPROM image are automatically recalculated checksum of the service areas of the Registrar. Work with the Registrar: ..

Bosch ME17.9.7 VAZ, the Registrar

In stock

The module allows you to view and edit data recorder, which are stored in the EEPROM. It is possible to work as with binary EEPROM images (files .eep), and with container SMS-Soft Container File (files .bcf). When you save the EEPROM image are automatically recalculated checksum of the service areas of the Registrar. ..

Bosch ME17.9.7/71 VAZ/UAZ

In stock

Additional module for chip-tuning of cars VAZ and UAZ equipped with ECU M(E)17.9.7 and M(E)17.9.71 with electronic gas pedal and a manual throttle control. The module allows for complete customization of the engine control ME17. Change all the most important calibration, including torque model, E-GAS, lambda control, mask error, limiters of speed and revs. The module generates the checksums and..

Bosch ME17.9.7/71 VAZ/UAZ dual-mode AT

In stock

The module is designed to create dual-mode firmware with a fully customized set of calibrations for the second mode. There is a possibility of fuel pump disconnection in any of the modes (a small portion of the firmware may not support this feature). You can also set the delay of switching modes in a wide range. Note: to use these modules requires a license to edit the firmware of the appropriate type! Fe..

The modl is designed for chip-tuning Peugeot and Citroen cars with naturally aspirated petrol engines with electronic throttle, Bosch ME7.4.5 ECU. Supported software versions: 08Sg0_D08Sg0 11Sb0_D11Sb0 13Sd0_D13Sd0 13Tb0_D13Tb0 18Ta0_D18Ta0 19Te0_D19Te0 The module works in conjunction with ChipTuningPRO 7.2020 or higher. ECU programming is carried out using the Comb..

In stock

Bosch ME7.4.5 PSA

Bosch ME9.1 Chevrolet Captiva

In stock

For chip tuning cars Chevrolet Captiva and Opel Antara with the engine volume of 3.2 L. ..

Bosch MED17.1 VAG (author KHN09)

In stock

The module is designed for chip-tuning VAG cars with engines 1.8 T, 2.0 T, equipped with Bosch MED17.1. Please note: Third-party module developer! Technical support from the author of the module (KHN09). Firmware families Bosch МЕ17 are stored by default in the format of SMS-Soft Container File. To download these firmware you need to use loader only CombiLoader. Saving in the usual BIN format is also..

Bosch MED17.1.6 VW Touareg 3.6 FSI

In stock

The module is designed for chip-tuning VW Touareg 3.6 FSI engines CGRA CMTA and equipped with Bosch MED17.1.6. Please note: Firmware families Bosch МЕ17 are stored by default in the format of SMS-Soft Container File. To download these firmware you need to use loader only CombiLoader. Saving in the usual BIN format is also possible. Write the firmware with a modified calibration diagnostic ..

Bosch MED17.4.2 Citroen/Peugeot (author KHN09)

In stock

Please note: Third-party module developer! Technical support from the author of the module (KHN09). Firmware families Bosch МЕ17 are stored by default in the format of SMS-Soft Container File. To download these firmware you need to use loader only CombiLoader. Saving in the usual BIN format is also possible. Write the firmware with a modified calibration diagnostic method is possible with the bootl..

Bosch MED17.4.4. (author KHN09)

In stock

The module is designed for chip tuning of Citroen and Peugeot cars with 5GY (EP6FDTM), 5GZ (EP6FDT) engines equipped with Bosch MED17.4.4, for example, Peugeot 208 A9, Peugeot 308 T9, Peugeot 3008 T8, Citroen DS3 A55, Citroen DS5 B81, Citroen C4 Grand Picasso B78. Pay attention: A third-party developer module! Technical support from the author of the module (KHN09). Firmware of Bosch ME17 f..

Bosch MED17.5 VAG (author KHN09)

In stock

The module is designed for chip-tuning VAG cars equipped with Bosch MED17.5, for example, VW Tiguan 2.0 L TSI, VW Passat B6 1.8 L, Skoda Oktavia 1.8 L TSI, Audi A4 1.8 L TFSI, Seat Altea, Skoda Yeti 1.8 L TSI, etc.. Please note: Third-party module developer! Technical support from the author of the module (KHN09). Firmware families Bosch МЕ17 are stored by default in the format of SMS-Soft Conta..

Bosch MED17.5.2 VAG (author KHN09)

In stock

The module is designed for chip-tuning VAG cars equipped with Bosch MED17.5.2, for example, VW Passat 1.8 L. Please note: Third-party module developer! Technical support from the author of the module (KHN09). Firmware families Bosch МЕ17 are stored by default in the format of SMS-Soft Container File. To download these firmware you need to use loader only CombiLoader. Saving in the usual BI..

Bosch MED17.5.20 VAG (author KHN09)

In stock

The module is designed for chip tuning of VAG cars equipped with Bosch MED17.5.20 with 1.4 TFSI engines. Pay attention: A third-party developer module! Technical support from the author of the module (KHN09). Firmware of Bosch ME17 family controllers are saved in SMS-Soft Container File format by default. To download such firmware, you need to use only the CombiLoader loader. Saving in ..

Bosch MED17.5.21 VAG (author KHN09)

In stock

The module is designed for chip-tuning VAG cars equipped with Bosch MED17.5.21, for example, the VW Golf 1.4 TSI, Skoda Octavia 1.2 TSI, Audi A3 1.4 TSI. Please note: Third-party module developer! Technical support from the author of the module (KHN09). Firmware families Bosch МЕ17 are stored by default in the format of SMS-Soft Container File. To download these firmware you need to use loader only CombiLo..

Bosch MED17.5.25 VAG (author KHN09)

In stock

The module is designed for chip-tuning VAG cars equipped with Bosch MED17.5.25, for example, the VW Golf 1.2 TSI, 1.4 TFSI, Skoda Octavia, Skoda Superb 1.4 TFSI, VW Jetta 1.4 TFSI. Please note: Third-party module developer! Technical support from the author of the module (KHN09). Firmware families Bosch МЕ17 are stored by default in the format of SMS-Soft Container File. To download these firmwa..

Bosch MED17.5.5 VAG (author KHN09)

In stock

The module is designed for chip-tuning VAG cars equipped with Bosch MED17.5.5, for example, VW Touran 1.4 TFSI, VW Golf IV 1.4 TSI, VW Tiguan 1.4 TSI, Skoda Superb 1.4 TSI. Please note: Third-party module developer! Technical support from the author of the module (KHN09). Firmware families Bosch МЕ17 are stored by default in the format of SMS-Soft Container File. To download these firmware you n..

Bosch MED17.8.The 10th China (author KHN09)

In stock

The module is designed for chip-tuning of automobiles in China, equipped with Bosch MED17.8.10, for example, Geely Atlas 1.8 T. Please note: Third-party module developer! Technical support from the author of the module (KHN09). Firmware families Bosch МЕ17 are stored by default in the format of SMS-Soft Container File. To download these firmware you need to use loader only CombiLoader. Sav..

Bosch MED17.9.8 and ME17.9.8 Hyundai/Kia (author KHN09)

In stock

Please note: Third-party module developer! Technical support from the author of the module (KHN09). Firmware families Bosch МЕ17 are stored by default in the format of SMS-Soft Container File. To download these firmware you need to use loader only CombiLoader. Saving in the usual BIN format is also possible. Write the firmware with a modified calibration diagnostic method is possible using module B..

Bosch MED17.9.8 Hyundai/Kia dual-mode AT

In stock

The module is designed to create dual-mode firmware with a fully customized set of calibrations for the second mode. There is a possibility of fuel pump disconnection in any of the modes (a small portion of the firmware may not support this feature). You can also set the delay of switching modes in a wide range. Note: to use these modules requires a license to edit the firmware of the appropriate type! Fe..

Bosch MEV17.4.x Citroen/Peugeot (author KHN09)

In stock

Please note: Third-party module developer! Technical support from the author of the module (KHN09). Firmware families Bosch МЕ17 are stored by default in the format of SMS-Soft Container File. To download these firmware you need to use loader only CombiLoader. Saving in the usual BIN format is also possible. Write the firmware with a modified calibration diagnostic method is possible with the bootl..

Bosch MEVD17.2.4 BMW (автор KHN09)

In stock

Optional module for chip tuning of BMW cars with Bosch MEVD17 control units.2.4 Pay attention: Third-party developer modules! Technical support from the author of the module (KHN09). The firmware of the Bosch ME17 family of controllers is saved in the SMS-Soft Container File format by default. To download such firmware, you only need to use the CombiLoader loader. Saving in the normal BIN ..

Bosch MEVD17.2.5 BMW (автор KHN09)

In stock

Optional module for chip tuning of BMW cars with Bosch MEVD17.2.5 Pay attention: Third-party developer modules! Technical support from the author of the module (KHN09). The firmware of the Bosch ME17 family of controllers is saved in the SMS-Soft Container File format by default. To download such firmware, you only need to use the CombiLoader loader. Saving in the normal BIN format is also..

Bosch MEVD17.2.9 BMW (autor KHN09)

In stock

Optional module for chip tuning of BMW cars with Bosch MEVD17.2.9 control units. Pay attention: A third-party developer module! Technical support from the author of the module (KHN09). The firmware of the Bosch ME17 family controllers is saved in the SMS-Soft Container File format by default. To download such firmware, you only need to use the CombiLoader loader. Saving in the normal BIN f..

Bosch MEVD17.2.G BMW (by KHN09)

In stock

The module is designed for chip tuning of BMW cars with the N55B30 engine. Pay attention: Third-party developer modules! Technical support from the author of the module (KHN09). Firmware of Bosch ME17 family controllers are saved in SMS-Soft Container File format by default. To download such firmware, you need to use only the CombiLoader loader. Saving in the usual BIN format is also possi..

Bosch MEVD17.4.2 PSA (author KHN09)

In stock

Additional module for chip tuning Peugeot with the control units Bosch MEVD17.4.2. Please note: Third-party module developer! Technical support from the author of the module (KHN09). Firmware families Bosch МЕ17 are stored by default in the format of SMS-Soft Container File. To download these firmware you need to use loader only CombiLoader. Saving in the usual BIN format is also possible...

Bosch MG1CS001 VAG (author KHN09)

In stock

The module is designed for chip tuning of VAG group cars with gasoline engines, Bosch MG1CS001 ECU, for example: Audi A1 2.0 TFSI Audi A3 2.0 TFSI Audi A4 2.0 TFSI Audi A5 2.0 TFSI Audi A7 2.0 TFSI Audi Q2 2.0 TFSI Audi Q3 2.0 TFSI Audi Q5 2.0 TFSI Audi Q7 2.0 TFSI Audi TT 2.0 TFSI Seat Alteca 2.0 TFSI Skoda Karoq 2.0 TFSI Skoda Kodiaq 2.0 TFSI ..

Bosch MG1CS003 BMW (by Maxim Glazykin)

In stock

The Bosch MG1CS003 module (DME840, DME840H, DME841, DME841H, DME860, DME861, DME880, DME8C0) for BMW is designed for chip tuning of BMW vehicles with N63xx, N74xx, B46xx, B48xx, and B58xx gasoline engines. It is compatible with the following BMW models: - 1 Series F20 - 2 Series F22 and F23 - 3 Series F30, F31, F34, F35, G20, and G21 - 4 Series F32, F33, and F36 - 5 Series G30, G31, and G38 - 6 Series G32 - 7 Series G11 and..

The module allows you to produce professional chip tuning of motorcycles (CF-Moto X6 EFI, etc.) ECU Bosch MSE3.0. The programming of this ECU is carried out using a Bosch module M(E)7.9.7 (OBDII) loader CombiLoader. Deep research (reverse engineering) of the program control allowed us to create unparalleled tool for a full chip-tuning ATV equipped with ECU Bosch MSE3.0. You can edit all the nec..

In stock

Bosch MSE3.0

Continental SID208 Ford/PSA (author Vladimir Kulikov)

In stock

The module is designed for chip-tuning diesel cars Ford, Peugeot and Citroen equipped with Continental SID208: Ford Ranger 3.2 TDCI Ford Transit 2.2 TDCI Ford Transit 2.4 TDCI Peugeot Boxer 2.2 HDI Citroen Jumper 2.2 HDI Please note: Third-party module developer! Technical support from the module author Vladimir Kulikov. Supported versions: CAFRP950 CAFRQ950 ..

Continental SID807 PSA (author Vladimir Kulikov)

In stock

The module is designed for chip-tuning diesel cars fitted with Continental SID807: Citroen C3 1600 HDi Citroen C3 Picasso 1600 HDi Citroen C4 1600 HDi Citroen C4 Grand Picasso 1600 HDi Citroen C5 1600 HDi Citroen DS3 HDi 1600 Citroen DS4 HDi 1600 Peugeot 308 1600 HDi Peugeot 408 HDi 1600 Peugeot 3008 HDi 1600 Peugeot 5008 HDi 1600 Peugeot Partner 1600..

Continental SIM2K-241/242/245

In stock

Additional module for chip tuning Hyundai and Kia, ECU Continental (Siemens) SIM2K-241/242/245. Supported versions: KR77355119 KR77355121 KR77355122 KR77355137 KR77395114 (in development) KR77395116 KR77395119 KR77315135 KR77315138 Features of the module: Professional module — 750 calibration maps (for version KR77395119). The possibi..

Delphi DCM 6.2 PSA (by D. Kolyasnikov)

In stock

The module is designed for chip tuning of Peugeot, Citroen, Opel, Toyota cars with 2.0l diesel engines (PSA EMP2 platform). Delphi DCM6.2 / 6.2A / 6.2C ECU. The module contains more than 400 calibrations: speed limiter, torque and power limiters (more than 60 limiters in total, including EGT limiters and transmission protection), torque model (calculation of the amount of injection, request of the moment by t..

Delphi DCM 6.2 VAG (by D. Kolyasnikov)

In stock

The module is designed for chip tuning of VAG concern cars with 2.0l diesel engines. Delphi DCM6 ECU.2. The module contains more than 450 calibrations: speed limiter, engine torque limiters (incl. smoke) and transmission, torque model (calculation of the amount of injection, request of the moment by the driver), injection and turbocharging control (incl. surge warning, compression coefficients, pressure gain ..

Delphi DCM3.7 China (author Vladimir Kulikov)

In stock

The module is designed for chip tuning of Great Wall Hover cars and others with 2.0 TDI diesel engines, Delphi DCM 3.7 ECU. Pay attention: A third-party developer module! Technical support from the author of the module (V. Kulikova). Supported software versions: UQA08A01 UQA08A03 UQA08B01 UQA08B03 UQA09B01 UQC40 UQC62 UQG14D01 UQ..

Delphi DCM3.7 GM (author Vladimir Kulikov)

In stock

The module is designed for chip tuning of Chevrolet Captiva, Cruze, Orlando, Daewoo Winstorm, Opel Antara, etc. with 2.0TDI and 2.2TDI diesel engines, Delphi DCM 3.7 ECU. Pay attention: A third-party developer module! Technical support from the author of the module (V. Kulikova). Supported software versions: UGD83N UGD90L UGD90P UGD90Q UGD90U UGD90W U..

Delphi DCM3.7 Hyundai / Kia (author Vladimir Kulikov)

In stock

The module is designed for chip tuning of Hyundai Starex, Porter, HD78, i30, KIA Bongo and others cars with 2.5CRDI diesel engines, Delphi DCM 3.7 ECU. Note: Third party module! Technical support from the author of the module (V. Kulikov). Supported software versions: U7M87 U7M88 U7M90 U7M92 U7M96 U7M97 U7M99 U7M99_TQPE04 There are about 35..

Delphi DCM3.7 Ssang Yong (author Vladimir Kulikov)

In stock

The module is designed for chip tuning of Ssang Yong Actyon, Korando, Rexton, Rodius, Stavic, etc. cars with 2.0TDI and 2.2TDI diesel engines, Delphi DCM 3.7 ECU. Pay attention: A third-party developer module! Technical support from the author of the module (V. Kulikova). Supported software versions: UCA33D01 UCA34E148 UCA34E150 UCA34E154 UCA34H175..

For chip-tuning Chevrolet. ..

In stock

Delphi MR-140/HV-240

The module allows you to produce professional chip tuning motorcycles, the Delphi MT05 ECU (firmware size 128 KB) and Delphi MT05.2 (firmware size 256 KB). The programming of this ECU is using the module Delphi MT-05 loader CombiLoader. Deep research (reverse engineering) program management this ECU is allowed to create a new and unique tool for full chip-tuning vehicles that equipped with ECU ..

In stock

Delphi MT05

For chip-tuning of cars of Chinese production (Great Wall Hover, Great Wall Safe, BYD F3, Chery Tiggo, etc.). ..

In stock

Delphi MT20U

For chip-tuning of cars of Chinese production (Great Wall Hover, Great Wall Safe, BYD F3, Chery Tiggo, etc.). ..

In stock

Delphi MT20U2

Delphi MT22.1 (author (KHN09)

In stock

The module allows to make the chip tuning of the car Geely Emgrand EC7, Geely Emgrand X7, Lifan X60, Lifan Cebrium, Solano Lifan, equipped with ECU Delphi MT22.1. Please note: Third-party module developer! Technical support from the author of the module (KHN09). ECU programming Delphi MT22.1 by means of the loader CombiLoader. The cards contain over 100 of the most popular for high-quality..

Delphi MT22.5 (author (KHN09)

In stock

The module allows to make the chip tuning of the car Geely Emgrand EC7, Geely Emgrand X7, Lifan X60, Lifan Cebrium, Solano Lifan, equipped with ECU Delphi MT22.3 and MT22.5. Please note: Third-party module developer! Technical support from the author of the module (KHN09). ECU programming Delphi MT22.5 by means of the loader CombiLoader. The cards contain over 100 of the most popular for h..

Delphi MT38 (author KHN09)

In stock

Module allow to make the chip tuning Hyundai/Kia with engines V6 2.7/3.3/3.8 L, equipped with ECU Delphi MT38. Please note: Third-party module developer! Technical support from the author of the module (KHN09). ECU programming Delphi MT38 by means of the loader CombiLoader. The cards contain over 130 the most popular for chip-tuning of the calibrations. Supported versions: BH..

For chip-tuning Chevrolet and Geely Emgrand. ..

In stock

Delphi MT80

Delphi MT86 (author KHN09)

In stock

Module allow to make the chip tuning Hyundai Genesis/Equus, Kia Cadenza/Quoris/Sorento Prime engines 3.3/3.8/5.0 l, equipped with ECU Delphi MT86. Please note: Third-party module developer! Technical support from the author of the module (KHN09). ECU programming Delphi MT86 by means of the loader CombiLoader. The cards contain more than 160 of the most popular for chip-tuning of the calibr..

Denso Diesel Hyundai/Kia SH72543/SH72546 (author Vladimir Kulikov)

In stock

The module is designed for chip tuning of Hyundai and Kia cars with EURO-6 diesel engines equipped with Denso ECU with SH72543/SH72546 processors. Pay attention: A third-party developer module! Technical support from the author of the module (V. Kulikova). Supported software versions: JD40A2__A0M0e40 JD4BA2__A0M4e40 JD4PA2__A0M7e40 JD57A2__A0R3e40 JD5AA2__A0Q9e40 ..

Denso Suzuki (author Vladimir Kulikov)

In stock

The module is designed for chip tuning of Suzuki Jimny, Liana, Grand Vitara, Swift, SX4 cars with 1.3L, 1.5L, 1.6L, 2.0L, 2.4L engines equipped with Denso ECU with SH7055 and SH7058 processors. Pay attention: A third-party developer module! Technical support from the author of the module (V. Kulikova). A Limited module with a limited number of calibrations! Supported software versions: ..

DSG DL501 VAG (author Vladimir Kulikov)

In stock

Module DL501 designed for chip-tuning VAG cars (Audi and other vehicles VAG with longitudinal engine). Please note: Modules a third-party developer! Technical support from the author of the module (V. Kulikova). Modules are independent from each other and are purchased separately. Supported versions DL501: 4G0927156M_0010 4G0927156M_0015 4G0927156M_00..

DSG DQ500 VAG (author Vladimir Kulikov)

In stock

Module DQ500 is designed for chip-tuning VAG cars (7 speed DSG, which is installed on the cars of concern VAG c a transverse engine). Please note: Modules a third-party developer! Technical support from the author of the module (V. Kulikova). Modules are independent from each other and are purchased separately. Supported versions DQ500: CAST3700 CAST3A00 CAST3B00 ..

$174.10

In stock

DSG6 DQ200 VAG (author Vladimir Kulikov)

Module DQ200 is designed for chip-tuning VAG cars equipped with automatic transmission DQ200 DSG6 Rev. DQ200 (0AM), DQ200MQB (0CW), DQ200G2 (0CW). Please note: Third-party module developer! Technical support from the author of the module (V. Kulikova). Supported versions DQ200: 0CW300040H_0006 0CW300040Q_0002 0CW300041B_0006 0CW300048M_0010 0CW300049L_0004 C..

DSG6 DQ250 VAG (author Vladimir Kulikov)

In stock

Module DQ250 is designed for chip-tuning VAG cars equipped with automatic transmissions DSG6 DQ250 Rev. C/E/F(02E), MQB(0D9). Please note: Third-party module developer! Technical support from the author of the module (V. Kulikova). Supported versions of DQ250 ON: E19 E19R1 F26S F27SК1 F35S F40S F43SR1 F45M F49M ..

The module is designed for chip tuning of Geely vehicles equipped with DSI TCM automatic transmission. Module Features: Limited module with a limited number of calibrations! The module calculates the COP. Hardware versions 02F and 02R are supported. Supported software versions: HW02F_104_010_005_000_001 HW02F_104_010_009_000_000 HW02F_104_011_003_000_000 HW0..

In stock

DSI TCM Geely

This module allows you to produce a chip tuning Daewoo vehicles equipped with the GM DELCO ECU ITMS-6F IEFI and-6. The module works in conjunction with ChipTuningPRO 6.74 or higher. ..

In stock

GM Daewoo

$23.21

In stock

Kefico CPEGD2.20.1 / CPEGD2.20.2 / CPEGD2.20.3 / CPGDSH2.26.1 / CPGDSH2.26.3 / CPGPSH2.14.1 (author Vladimir Kulikov)

The module is designed for chip tuning of Korean-made cars of 2018 and newer with GDI gasoline engines equipped with Kefico CPEGD2.20.1 / CPEGD2.20.2 / CPEGD2.20.3 / CPGDSH2.26.1 / CPGDSH2.26.3 / CPGPSH2.14 ECUs.1. These ECUs are used on cars such as: Hyundai Elantra, Avante (AD) 1.6 GDI 132HP, 1.6Turbo 201HP Hyundai HB20 1.0 GDI 120HP Hyundai Kona 1.0 GDI 120HP Hyundai Tucson 1.6Tur..

In stock

M73

Cars VAZ. Used 2008 ..

The module allows you to convert any serial in three-mode version. Support switching complete sets of calibrations, including identifiers and the mask of DTC. Toggle options: channel or DTV channel ДК2. Provided disabling the fuel pump (with programmable delay) and the injectors individually for each mode. This module works only if you have a license for the module M74. ..

In stock

M74 multimode

The module allows you to produce professional chip tuning of cars VAZ with electronic gas pedal (EGAS), equipped with the latest ECU M74. Also supports editing firmware ECM M74K (VAZ 'Classic', without an electronic gas pedal). Edited over 380 calibrations of the control system M74: starting modes, advance angle, the fuel with dynamic adjustments, torque model calibration of the system EGAS, mask error, etc. the Checksum is..

In stock

M74 WHA

M74.5 and M75 (FOR ITELMA) Registrar

In stock

The module allows you to view and edit data recorder, which are stored in the EEPROM. It is possible to work as with binary EEPROM images (files .eep), and with container SMS-Soft Container File (files .bcf). When you save the EEPROM image are automatically recalculated checksum of the service areas of the Registrar. ..

The module is designed to create dual-mode firmware with an individual set of calibrations for the second mode. When you create a dual-mode firmware of the usual standard you can select the calibration, which will create steam in the second set, getting an individual set of calibrations needed for you. The number of calibrations is limited by the availability of free space in the firmware. To create pairs suitable constants..

In stock

M74.5 dual-mode AT

New car equipped with an engine 21127 with adjustable geometry intake tract. ..

In stock

M74.5 vases

The module allows for professional chip tuning of cars "Niva Legend 21214" and "Niva Travel 2123" of the 2022 model year with an electronic gas pedal (EGAS) equipped with the latest M74.8 ECU. More than 900 calibrations of the M74.8 control system are available for editing, allowing virtually unlimited possibilities for chip tuning: starting modes, UOZ, fuel supply with dynamic corrections and fuel film, torque model, EGAS ..

In stock

M74.8 Niva

The module allows for professional chip tuning of Gazelle vehicles with Evotech 2.7L engines from the 2024 model year and newer with electronic throttle pedal (EGAS), equipped with the latest ECU M74.9.1. There are over 1000 calibrations available for editing the M74.9 control system, providing virtually unlimited possibilities for chip tuning: start-up modes, ignition timing, fuel delivery with dynamic corrections and fuel..

In stock

M74.9 GAZ

The module allows you to convert the serial software M74.9 Niva into a dual-mode version. Switching of complete calibration sets is supported, excluding identifiers. Switching by a low level of the DC2 ADC channel. It is possible to turn off the fuel pump (by standard calibrations) individually for each mode. This module works only if you have a license for the M74.9 Niva module. &nb..

In stock

M74.9 Niva MULTIMODE

M74.9 Niva/Grant For owners of the M74.8 module

In stock

The module allows to make the chip tuning Opel and Chevrolet vehicles that equipped with ECU ACDelco E83. Examples of vehicles equipped with this type of ECU: Opel Astra J A16XER, A18XER Opel Astra J, Opel Astra J A16LET, Opel Corsa D A12XER, A14XER Opel Corsa D, Opel Insignia A16XER, A18XER Opel Insignia, Opel A14NET Meriva B, Chevrolet Cobalt 1.5. ..

The module is designed to create dual-mode firmware with an individual set of calibrations for the second mode. When you create a dual-mode firmware of the usual standard you can select the calibration, which will create steam in the second set, getting an individual set of calibrations needed for you. The number of calibrations is limited by the availability of free space in the firmware. To create pairs suitable constants..

In stock

M75 dual-mode AT

New cars VAZ with electronic gas pedal. ..

In stock

M75 WHA

M86 (Cars UAZ, AT ITELMA)

In stock

New ECU M86 applies to cars UAZ Pro. Manufacturer software hardware — NPP ITELMA. This module allows you to produce professional chip tuning UAZ Pro equipped ECU M86 with ITELMA. Edited more than 950 calibration management system M86, which allows full professional chip tuning UAZ. The module works in conjunction with ChipTuningPRO 7.2017 or higher. The ECU programming is done using the loader CombiLoader..

M86 (FOR ITELMA) dual-mode FOR

In stock

The module is designed to create dual-mode firmware with an individual set of calibrations for the second mode. When you create a dual-mode firmware of the usual standard you can select the calibration, which will create steam in the second set, getting an individual set of calibrations needed for you. The number of calibrations is limited by the availability of free space in the firmware. To create pairs suitable constants..

New ECU M86 applies to cars Lada Vesta and X-Ray. The M86 project is a further development of motor control M74/M75/M74.5. Manufacturer of hardware — NPP ITELMA. By analogy with the systems of the previous generation M74 and M75, the new project will apply two different types of software FOR the production of vases and production ITELMA. This module allows you to produce professional chip-tuning Vesta and X-Ray, equippe..

In stock

M86 (ITELMA)

M86/M74M (FOR VAZ) + MULTIMODE

In stock

ECU M86 applies to cars Lada Vesta and X-Ray. The M86 project is a further development of motor control M74/M75. The manufacturer of the ECU — NPP ITELMA. By analogy with the systems of the previous generation M74 and M75, the new project will apply two different types of software FOR the production of vases and production ITELMA. M86 is built on a high-performance 16-bit microcontroller Infineon SAK-XC2768 having, compared..

New ECU M86 applies to cars Lada Vesta and X-Ray. The M86 project is a further development of motor control M74/M75/M74.5. Manufacturer of hardware — NPP ITELMA. By analogy with the systems of the previous generation M74 and M75, the new project will apply two different types of software FOR the production of vases and production ITELMA. This module allows you to produce professional chip-tuning Vesta and X-Ray, equippe..

In stock

M86I (ITELMA)

Magneti Marelli MM4HV (author KHN09)

In stock

Module MM4HV designed for chip-tuning VAG cars equipped with Magneti Marelli 4HV, for example, VW Polo 1.4 L, VW Jetta 1.4 L, 1.4 L Skoda Rapid, Skoda Fabia 1.4 L. Please note: Modules a third-party developer! Technical support from the author of the module (KHN09). Read and write firmware with boot loader CombiLoader. Supported versions MM4HV: P3463 P3564 P5321 P5329 ..

The module is designed for chip-tuning VAG cars equipped with Magneti Marelli 7GV, for example, the VW Polo 1.6 L, VW Jetta 1.6 L, Skoda Rapid 1.6 L, Skoda Fabia 1.6 L. Please note: Third-party module developer! Technical support from the author of the module (KHN09). Read and write firmware with boot loader CombiLoader. Supported versions: D0017 D0019 D0034 D0049..

In stock

Magneti Marelli MM7GV

This module enables the following additional functions: Mixing of the calibration firmware Bosch ME17.9.7 VAZ and UAZ. The function requires the module ME17.9.7 VAZ/UAZ. Patch to disallow read firmware Bosch ME17.9.7, Bosch ME17.9.71 (VAZ, UAZ), Bosch ME17.9.11/12 and ME17.9.21 (Kia, Hyundai) diagnostic methods. The feature requires any module to work with the ECU of the family ME17. New! The function of..

In stock

ME17 behavior module

MEVD17.2.6 BMW (author KHN09)

In stock

Pay attention: Third-party developer modules! Technical support from the author of the module (KHN09). Firmware of Bosch ME17 family controllers are saved in SMS-Soft Container File format by default. To download such firmware, you need to use only the CombiLoader loader. Saving in the usual BIN format is also possible. Supported software versions, Bosch MEVD17 module.2.5: 9ZX9890B 9Z..

ZAZ Slavuta, Daewoo Ukrainian Assembly, GAZ. ..

In stock

MIKAS-10.3 (M113, M114)

$23.21

In stock

MIKAS-11/VS-8

This module allows you to make chip-tuning of cars GAZ and UAZ vehicles that equipped with ECU Mikas-11, Mikas-11CR, Mikas-11ET, VS-8. Supports the following versions: The number of the ECU and firmware version of the ECU 824.3763.001-05 0789_101 821.3763.000-01 0789_051 822.3763.001-01 0788_054 821.3763.000-01 0788_059 821.3763.000-02 0788_061 805.3763.000-01 0788_06..

In stock

In stock

MIKAS-12 dual-mode soft

The family of modules includes three separate module from the ECU to the M74.5, M75, MIKAS-12 or M86 (FOR ITELMA, firmware, VAZ and UAZ), which can be purchased independently. All the modules have identical functionality and are designed to create dual-mode firmware with an individual set of calibrations for the second mode. When creating the creation of dual-mode firmware of the usual standard you can select the calibratio..

Mikas-12 M86 and UAZ (FOR ITELMA) Registrar

In stock

The module allows you to view and edit data recorder, which are stored in the EEPROM. It is possible to work with binary images EEPROM size of 4 KB or 64 KB (the file .eep), and with container SMS-Soft Container File (files .bcf). When you save the EEPROM image are automatically recalculated checksum of the service areas of the Registrar. ..

In stock

In stock

Mitsubishi Lancer 1.5 L 10

For chip-tuning cars Mitsubishi Lancer 10 with engines of 1.5 L. ..

For chip-tuning cars Mitsubishi Lancer 10 (except vehicles with engines of 1.5 L). ..

In stock

Mitsubishi Lancer 10

Mitsubishi Outlander XL Mitsubishi ASX

In stock

The module allows you to produce professional chip tuning Mitsubishi Outlander XL with engines of 2.4 L and 3.0 L (manual and CVT) and Mitsubishi ASX with dvigatelem 2.0 L and Citroen C-Crosser and Peugeot 4007 made on the platform of the Outlander. Has no analogues on the number of calibrations available on the market domestic and abroad. The module works with firmware JDM market that are officially sold in Russia. The mod..

Nissan Denso Diesel 2.5TDI Denso SH7058 (author Vladimir Kulikov)

In stock

The Nissan Denso Diesel 2.5 TDI SH7058 module is designed for chip tuning of Nissan Cabstar, Condor, Navara, NP300, Pathfinder, Vanette, X-Trail, etc. cars with 2.5TDI diesel engines equipped with Denso ECU with SH7058 processors. Pay attention: Third-party developer modules! Technical support from the author of the module (V. Kulikova). Limited modules with a limited number of calibrations! ..

Nissan Denso Diesel 2.5TDI Denso SH7059 (author Vladimir Kulikov)

In stock

The Nissan Denso Diesel 2.5 TDI SH7059 module is designed for chip tuning of Nissan Navara, Pathfinder, Cabstar, Murano, NV300, Caravan, etc. cars with 2.5TDI diesel engines equipped with Denso ECU with SH7059 processors. Pay attention: Third-party developer modules! Technical support from the author of the module (V. Kulikova). Limited modules with a limited number of calibrations! Suppor..

Nissan Qashqai / X-Trail 2.0 Hitachi SH725331N (author KHN09)

In stock

Please note: Third-party module developer! Technical support from the author of the module (KHN09). The module does NOT checksum when you save the firmware. Supported firmware versions: 14CE5A_F4KH1DQGNV1-20161015-130049 — Nissan X-trail T32 2.0 144hp 2015 AT 14CE5B_F4KH1DQGNV1-20160319-113202 — Nissan X-trail T32 2.0 144hp 2015 AT 14CE4C_F4KH1DQGNV1-20160927-194137 — Nissan X-trail T..

Registrar M74.8/M74.9 Niva

In stock

The module allows you to view and edit the registrar's data, which is stored in the EEPROM. When saving an EEPROM image, the checksums of the required EEPROM areas are automatically recalculated. ..

Siemens EMS3120 Lada Largus

In stock

The module allows you to produce a professional chip tuning Lada Largus cars equipped with ECU Continental EMS3120. Supported firmware versions: HW7908R_SW09350_90047 Features of the module: The possibility of open firmware (FullFlash only) in BIN format or SMS-Soft Container File. Automatic checksum when you save the firmware, including additional COP monitoring security. For additiona..

Siemens EMS3120 Logan/Sandero

In stock

The module allows you to produce a professional chip tuning for Renault Logan and Renault Sandero 2 2 that equipped with ECU Continental EMS3120. Supported IDs firmware module Logan/Sandero: HW4319R_SW4234R_4541R HW4319R_SW4234R_4928R HW4319R_SW4234R_4929R HW4319R_SW4234R_5992R HW4319R_SW4234R_6214R HW4319R_SW4234R_6215R HW4319R_SW4234R_6216R HW4319R_SW4234R_8641R ..

Siemens EMS3125 chest X-Ray, Renault Duster

In stock

The module allows you to produce professional chip tuning Lada X-Ray and Renault Duster/Kaptur, equipped with ECU Continental EMS3125. Supports any version of calibration based on series RDE450, RDE540, RDE570. Features of the module: About 550 of calibrations available for editing The possibility of open firmware (FullFlash only) in BIN format or SMS-Soft Container File. Au..

For chip-tuning for Renault (Logan, Sandero, Symbol), Nissan (Almera) and VAZ (Largus). ..

In stock

Siemens EMS3132 Renault

The module allows you to produce a professional chip tuning for Renault Logan, Renault Sandero, Nissan Almera engine 1.6 L, automatic transmission, equipped with ECU Continental/Siemens EMS3134. Supported versions: REA820 REA830 Features of the module: The possibility of opening the flash SMS-Soft Container File (new format for ChipTuningPRO and CombiLoader). The possibility of opening ..

In stock

Siemens EMS3134 Renault

This module allows you to make chip-tuning BMW MS42 ECU (engine MT52TU, Serie 3 E36, 5 E39 Serie) and MS43 (E46 Serie 3, Serie 5 E39, X5 E53). The module works in conjunction with ChipTuningPRO 7 or higher. The ECU programming is done using the loader CombiLoader. Maps contain more than 150 calibrations, including starting the calibration, ignition advance angle, fuel supply, injection phase timing VANOS, the coefficien..

In stock

Siemens MS42/MS43 BMW

For chip-tuning Opel cars with engines Z16XER and Z18XER. ..

In stock

Siemens Opel SIMTEC75

For chip-tuning Kia and Hyundai. ..

In stock

Siemens SIM2K-141/341

Additional module for chip tuning Chevrolet Spark M300 engine 1.25 L, ECU Continental (Siemens) SIM2K-243. Supported versions: 906FX2F2 906FX4F2 Features of the module: The possibility of opening the flash SMS-Soft Container File (new format for ChipTuningPRO and CombiLoader). The possibility of opening a firmware in BIN format (normal binary). Automatic checksum when you save the..

In stock

Siemens SIM2K-243

Siemens SIM2K-D160 Chevrolet Epica

In stock

The module is designed for chip tuning of Chevrolet Epica cars with 2.0L and 2.5L engines equipped with Siemens SIM2K-D160 ECU (5WY1B12G, 5WY1B18E, 5WY1B23E, 5WY1B41B, 5WY1B41D, 5WY1B41E, 5WY1B41F, 5WY1B42E, 5WY1B43E, 5WY1B46E, 5WY1B46F , 5WY1B60B, 5WY1B60C, 5WY1B60D, 5WY1B63D, 5WY1B63E, 5WY1B65A, 5WY1B65B, 5WY1B55G). In order to find out the firmware version of SIM2K-D160, you need to open the firmware file ..

Siemens SIMK43/SIMK41 Hyundai/Kia

In stock

For chip tuning Hyundai (Sonata, Elantra, Tiburon, Tucson, Coupe, Seed, Sportage etc.). ..

Siemens SIMTEC76 Chevrolet

In stock

For chip-tuning Chevrolet Cruze, Chevrolet Orlando engines Z16XER and Z18XER. ..

For chip-tuning Chevrolet of Russian and Ukrainian assemblies and Daewoo Matiz. ..

In stock

Siemens Sirius

For chip-tuning of cars Lifan. ..

In stock

Siemens Vagon VAx

For chip-tuning of cars Tagaz Tager/Road Partner and Ssang Yong Musso, Actyon, Rexton, Kyron petrol engines 2.3/2.8/3.2 L. ..

In stock

Siemens VDO MSE3.5

SIM28 Ford Focus II 1.6 L

In stock

For chip-tuning Ford Focus II with engines 1.4—1.6 L without adjustable phase timing, ECU Siemens SIM28. ..

SIM29 Ford Focus II 1.6 L

In stock

For chip-tuning Ford Focus II with engine 1.6 L with adjustable phase timing, ECU Siemens SIM29. ..

Supported versions: 906FX2F2 906FX4F2 Features of the module: The possibility of opening the flash SMS-Soft Container File (new format for ChipTuningPRO and CombiLoader). The possibility of opening a firmware in BIN format (normal binary). Automatic checksum when you save the firmware. For additional protection from accidental modifications of the data, which may affect the driv..

In stock

SIM2K243 GM

SIMOS 12. x VAG (author Vladimir Kulikov)

In stock

The module is designed for chip tuning of VAG cars with 1.8 TFSI and 2.0 TFSI petrol engines of the 3rd generation: Audi A4 1.8 TFSI, Audi A5 1.8 TFSI, Audi A5 2.0 TFSI, Audi A6 1.8 TFSI, Audi Q5 2.0 TFSI, Skoda Octavia 1.8 TFSI, Skoda SuperB Pay attention: A third-party developer module! Technical support from the author of the module (V. Kulikova). Supported software versions: CASC18F5..

SIMOS 18. x VAG (author Vladimir Kulikov)

In stock

The module is designed for chip tuning of VAG cars with gasoline engines 1.8TFSI and 2.0TFSI of the third generation: Audi A4/ A5 / A6, Audi Q3 / Q5, Audi TT, Porsche Macan, Skoda Octavia, Skoda Octavia RS, VW Passat, VW Polo GTI, VW Jetta, VW Tiguan, etc. Note: Third-party module! Technical support from the author of the module (V. Kulikova). Supported software versions: CASC8F84 ..

For chip-tuning Opel cars with engines Z10XEP, Z12XEP, Z14XEP. ..

In stock

The Bosch ME7.6.x Opel

The Bosch ME7.6.x Opel Z20LEx

In stock

For chip-tuning cars Opel turbocharged a series of engine Z20LEL, Z20LEH, Z20LER. ..

For chip-tuning of cars of Chinese production with electronic gas pedal. ..

In stock

The Bosch ME7.8.8 China

The Bosch ME7.9.20 Nissan

In stock

Additional module for chip tuning Nissan X-Trail 2.5 L, ECU Bosch ME7.9.20. The module works in conjunction with ChipTuningPRO 7.2018 or later. The ECU is equipped with an external (calibrated) and internal (management program) of the flash memory. Reading and writing to external memory is possible without watering chip flash, the BSL mode only using CombiLoader loader (and other loaders can't read external f..

For chip-tuning of cars Chery (QQ, Fora, B11, Acteco, Elara, Jagga, Eastar). ..

In stock

The Bosch ME7.9.7 China

The Bosch ME7.9.9 Chevrolet Captiva

In stock

For chip-tuning Chevrolet Captiva cars with engines 2.4 L. ..

The module allows for chip tuning cars Daewoo Gentra, equipped with ECU Delphi MT60. ..

In stock

The Delphi MT60

The M74, M86 (FOR vases), the Registrar

In stock

The module allows you to view and edit data recorder, which are stored in EEPROM (for the M74 only supports internal EEPROM 64KB). It is possible to work as with binary EEPROM images (files .eep), and with container SMS-Soft Container File (files .bcf). When you save the EEPROM image are automatically recalculated checksum of the service areas of the Registrar. ..

Toyota Denso Diesel 2.0D (author Vladimir Kulikov)

In stock

Toyota Denso Diesel 2.0D module for chip-tuning Toyota cars (Auris, Avensis, Corolla, Verso) with diesel engines 2.0L 1CD-FTV / 1AD-FTV, Denso ECU, 76F0004 320kB, 76F0040 368kB, 76F0039 496kB, 6F0038 736kB processors, 76F0085 992kB. Pay attention: Third-party developer modules! Technical support from the author of the module (V. Kulikova). About 600 basic calibrations are available for mod..

Toyota Denso Diesel 2.2D (author Vladimir Kulikov)

In stock

Toyota Denso Diesel 2.2 D module for chip tuning of Toyota/Lexus cars (Verso, Avensis, RAV4, Auris, IS220) with 2.2 L 2AD-FHV / 2AD-FTV diesel engines, Denso ECU, processors 76F0039 496kB, 6F0038 736kB, 76F0085 992kB. Pay attention: Third-party developer modules! Technical support from the author of the module (V. Kulikova). About 600 basic calibrations are available for modification. ..

Toyota Denso Diesel 2.4 D (author Vladimir Kulikov)

In stock

Toyota Denso Diesel 2.4 D module for chip tuning of Toyota (Hilux) cars with 2.4 L 2GD-FTV diesel engines, Denso ECU, processors D76F0196F1 1.5 MB, D76F0219F1 2MB. Pay attention: Third-party developer modules! Technical support from the author of the module (V. Kulikova). About 600 basic calibrations are available for modification. ..

Toyota Denso Diesel 2.5D (author Vladimir Kulikov)

In stock

The Toyota Denso Diesel 2.5 module is designed for chip tuning of Toyota cars with 2.5 diesel engines, Denso ECU. Pay attention: Third-party developer modules! Technical support from the author of the module (V. Kulikova). Supported software versions, Toyota Denso Diesel 2.5D module: 89663-0K351 89663-0KA12 89663-0KN13 89663-0KP91 89663-0KR70 89663-25073 ..

Toyota Denso Diesel 2.8D (author Vladimir Kulikov)

In stock

The Toyota Denso Diesel 2.8D module supports all software versions, including GEN3; processors D76F0196F1 (1536Kb), D76F0219F1 (2048kB), R7F701202 (4096Kb). Designed for chip tuning of Toyota cars with 2.8L diesel engines, Denso ECU. Pay attention: Third-party developer modules! Technical support from the author of the module (V. Kulikova). Supported software versions, Toyota Denso Diesel 2.8D m..

Toyota Denso Diesel 3.0D (author Vladimir Kulikov)

In stock

The Toyota Denso Diesel 3.0D (1KDFTV) module with 76F0040GD, 76F0039AGD, 76F0070, 76F0085 processors is designed for chip tuning of Toyota cars with 3.0L diesel engines, Denso ECU. Pay attention: A third-party developer module! Technical support from the author of the module (V. Kulikova). Supported software versions, Toyota Denso Diesel 3.0D module: 89663-0K121 89663-0K223 8..

Toyota Denso Diesel 4.5D (author Vladimir Kulikov)

In stock

The Toyota Denso Diesel 4.5D (1VD-FTV) module with 76F0070 processor is designed for chip tuning of Toyota cars with 4.5L diesel engines, Denso ECU. Pay attention: A third-party developer module! Technical support from the author of the module (V. Kulikova). Supported software versions, Toyota Denso Diesel 4.5D module: 89663-60A31 89663-60A32 89663-60A33 89663-60A34 ..

Toyota Denso Petrol 5.0i (author Vladimir Kulikov)

In stock

Toyota Denso Petrol 5.0i module for chip tuning of Toyota Century G60 (2017 - present), Lexus IS-F XE20 (2007 — 2014), Lexus RC-F XC10 (2014 — present), Lexus GS-F L10 (2015 — present), Lexus LC 500 URZ100 (2016 — present), Lexus LS 600h XF40 (2007 — 2017), etc. models with 5.0-liter 2UR-GSE and 2UR-FSE engines. Pay attention: Third-party developer modules! Technical support from the authors of the mo..

Toyota Denso Petrol 5.7i (author Vladimir Kulikov)

In stock

Toyota Denso Petrol 5.7i module for chip tuning of Toyota Sequoia, Tundra, Lexus LX570, etc. with 5.7-liter 3UR-FE and 3UR-FBE engines, Denso ECU. Pay attention: Third-party developer modules! Technical support from the authors of the module (V. Kulikova and A. Tesla). Supported software versions: 89663-0C430 89663-0C572 89663-0C582 89663-0C584 89663-0C592 8..

Cars Renault Duster 1.6 L and 2.0 L. ..

In stock

Valeo V42 Renault Duster

Valeo V42 Renault Logan/Sandero Stepway/Megane/Fluence

In stock

Cars Renault Logan/Sandero Stepway/Megane/Fluence with engines of 1.2 L and 1.6 L. ..

Valeo V46 Citroen/Peugeot

In stock

The module is designed for chip tuning Citroen/Peugeot with engines 1.2/1.6 L, equipped with ECU Valeo V46. Supported firmware for hardware version V46.21. The module works in conjunction with ChipTuningPRO 7.2016 or higher. The ECU programming is done using the loader CombiLoader. The cards contain more than 500 ECM calibrations Valeo: starting calibration, ignition advance angle and its correction, injection, ..

Visteon EEC-V (author A. Teslya)

In stock

The module is designed for chip tuning of Ford Focus 2.0, Maverick 3.0, Escape 2.3, Escape 3.0, Mazda Tribute 2.3 cars equipped with Visteon EEC-V ECU. Pay attention: A third-party developer module! Technical support from the author of the module (A. Teslya). A Limited module with a limited number of calibrations! Supported software versions: FDDP1A4 MBDHAA2 MBDHBAZ ..

Visteon ESU-131 5M51/8M51

In stock

Module Visteon ESU-131 5M51/8M51 designed for chip-tuning Ford Focus II and C-Max with engine 1.8 and 2.0 L, model years 2005 to 2007. Supported versions: 5M51JD (2005) 5M51JE (2006) 5M51RC (2005) 5M51RE (2006) 5M51RF (2006) 5M51SC (2005) 5M51SF (2006) 5M51VC (2006) 8M51KA (2006) 8M51KB (2006) 7M51BB (2007) 6S61XB (2006, Ford Fiesta ST,..

Module Visteon ESU-411/418 7M51 designed for chip-tuning Ford Focus II and C-Max with engine 1.8 and 2.0 L, model years 2007 and 2012. Supported versions: 7M51AAG (2010) 7M51ABA (2007) 7M51ADA (2007) 7M51ABC (2008) 7M51ACD (2009) 7M51ADE (2009) 7M51ADG (2012) 7M51ABD (2010) 7M51ADF (2010) 7M51BAB (2010) 7M51BAD (2010) 7M51VC (2007) ..

In stock

Visteon ESU-411/418 7M51